Replacing a gas boiler with a heat pump means removing the boiler and installing an air-to-water heat pump that heats your radiators and a stored hot water cylinder instead. Most UK homes heat with mains gas, so this is the switch many households are weighing up, and the existing radiators and pipework can often be reused with some changes. What needs most planning depends on the type of boiler you have now.
If your home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob. Many gas-heated homes in County Durham have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder. Semi-detached and terraced houses in County Durham often have an airing cupboard that can be reused for a heat pump cylinder.
Who it suits
- Boilers that are old, unreliable or due for replacement
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Households ready to give up gas entirely and drop the standing charge
- Combi owners who can find space for a hot water cylinder
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Gas boiler to heat pump prices in County Durham
The ranges below are typical installed prices for homes in County Durham, including VAT. A survey sets the exact figure, because two similar-looking houses in County Durham can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £1,700–£4,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £2,700–£5,600 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £4,150–£7,550 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £6,100–£9,950 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £8,500–£14,350 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in County Durham
We cover 14 towns in County Durham for replacing a gas boiler with a heat pump. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Darlington | DL1 | Newton Aycliffe | 7 h 16 min |
| Hartlepool | TS26 | Peterlee | 7 h 14 min |
| Stockton-on-Tees | TS18 | Billingham | 7 h 15 min |
| Durham | DH1 | Chester-le-Street | 7 h 13 min |
| Chester-le-Street | DH2 | Stanley | 7 h 12 min |
| Billingham | TS23 | Stockton-on-Tees | 7 h 15 min |
| Stanley | DH9 | Chester-le-Street | 7 h 12 min |
| Consett | DH8 | Stanley | 7 h 12 min |
| Newton Aycliffe | DL5 | Bishop Auckland | 7 h 15 min |
| Bishop Auckland | DL14 | Newton Aycliffe | 7 h 14 min |
| Seaham | SR7 | Peterlee | 7 h 12 min |
| Peterlee | SR8 | Seaham | 7 h 13 min |
| Barnard Castle | DL12 | Bishop Auckland | 7 h 16 min |
| Sedgefield | TS21 | Newton Aycliffe | 7 h 14 min |
Replacing a gas boiler with a heat pump questions
Is there a grant to replace a gas boiler with a heat pump?
In England and Wales, the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump that replaces a gas boiler, for eligible owners of existing homes. The MCS-certified installer applies to Ofgem and deducts the grant from your quote, and Ofgem contacts you to confirm. Scotland has separate Home Energy Scotland funding, and Northern Ireland has no dedicated homeowner grant at present.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
Should I have my gas meter removed?
If gas is used for nothing else, removing the meter ends the gas standing charge, which is about £108 a year at the October to December 2026 price cap. If you still cook on gas or have a gas fire, you will need to keep the supply. Meter removal is arranged through your gas supplier, usually once the heat pump is running; the pipe at the boiler position is capped during the installation.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.