- Area
- County Durham
- Postcode district
- DH8
- Nation
- England
- Guide price
- From £9,200 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump in Consett: what to expect
Every property in Consett is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Installers in Consett take out the old boiler and flue and seal the wall opening as part of the job. Households across County Durham moving off gas can have a survey in Consett that compares running costs on realistic assumptions.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Combi owners who can find space for a hot water cylinder
- Households ready to give up gas entirely and drop the standing charge
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Removal of the gas boiler, flue and any loft tanks
- Heat pump cylinder, outdoor unit and weather compensation controls
- Free survey with heat loss calculation and cylinder siting
- System flush and radiator upgrades where the design calls for them
If your Consett home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Grants and rules for heat pumps in England
Homes in Consett can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for replacing a gas boiler with a heat pump in Consett
Guide prices for Consett and the rest of County Durham are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £1,700–£4,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £2,700–£5,600 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £4,150–£7,550 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £6,100–£9,950 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £8,500–£14,350 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Consett's winters
On the shortest day Consett gets only about 7 hours 12 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
What happens after you enquire in Consett?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Consett home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Consett: questions
How long does a heat pump survey take in Consett?
A home survey in Consett usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Can you service a heat pump in Consett that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Consett, whoever fitted them. Tell us the make and model when you book.
Do I need new radiators for a heat pump in Consett?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Consett home gives a room-by-room list.
Should I have my gas meter removed?
If gas is used for nothing else, removing the meter ends the gas standing charge, which is about £108 a year at the October to December 2026 price cap. If you still cook on gas or have a gas fire, you will need to keep the supply. Meter removal is arranged through your gas supplier, usually once the heat pump is running; the pipe at the boiler position is capped during the installation.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.