- Area
- Cumbria
- Postcode district
- CA12
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump for Keswick homes
Every property in Keswick is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Semi-detached and terraced houses in Keswick often have an airing cupboard that can be reused for a heat pump cylinder. Rear gardens and side returns in Keswick usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Combi owners who can find space for a hot water cylinder
- Boilers that are old, unreliable or due for replacement
What's included
- System flush and radiator upgrades where the design calls for them
- Heat pump cylinder, outdoor unit and weather compensation controls
- Free survey with heat loss calculation and cylinder siting
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Capping of the gas pipe at the boiler position where you are giving up gas
Households across Cumbria moving off gas can have a survey in Keswick that compares running costs on realistic assumptions.
Grants and rules for heat pumps in England
Homes in Keswick can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for replacing a gas boiler with a heat pump in Keswick
The ranges below are typical installed prices for homes in Cumbria, including VAT. A survey sets the exact figure, because two similar-looking houses in Keswick can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Keswick
Keswick sees roughly 7 hours 15 minutes of daylight in December and 17 hours 17 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
How installation works in Keswick
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Keswick home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Keswick: questions
How soon can you survey a home in Keswick?
Survey dates depend on how busy installers are in Cumbria. We offer the next available dates when you enquire and confirm them in writing.
How long does installation take in Keswick?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Keswick home states the expected time.
Can you service a heat pump in Keswick that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Keswick, whoever fitted them. Tell us the make and model when you book.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
Should I have my gas meter removed?
If gas is used for nothing else, removing the meter ends the gas standing charge, which is about £108 a year at the October to December 2026 price cap. If you still cook on gas or have a gas fire, you will need to keep the supply. Meter removal is arranged through your gas supplier, usually once the heat pump is running; the pipe at the boiler position is capped during the installation.