- Area
- Dyfed
- Postcode district
- SA70
- Nation
- Wales
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump in Tenby: what to expect
Every property in Tenby is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Many gas-heated homes in Tenby have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder. If your Tenby home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Combi owners who can find space for a hot water cylinder
- System or regular boiler homes with an existing airing cupboard
What's included
- System flush and radiator upgrades where the design calls for them
- Free survey with heat loss calculation and cylinder siting
- Heat pump cylinder, outdoor unit and weather compensation controls
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Capping of the gas pipe at the boiler position where you are giving up gas
Rear gardens and side returns in Tenby usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours.
Grants and rules for heat pumps in Wales
In Wales the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027; £2,500 for air-to-air). The MCS-certified installer named in your quote applies to Ofgem for you, and the grant comes off your Tenby quote.
There is no VAT on installing a heat pump anywhere in the UK, Wales included, until 31 March 2027. Planning rules for heat pumps in Wales are set by the Welsh Government and differ from England's, so the surveyor checks the unit position against them.
Guide prices for replacing a gas boiler with a heat pump in Tenby
Here are typical prices for replacing a gas boiler with a heat pump in Dyfed, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Tenby and what they mean
On the shortest day Tenby gets about 7 hours 48 minutes of daylight, with the noon sun around 15° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
What happens after you enquire in Tenby?
- Start online with a guide price or call us.
- A home survey in Tenby gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing a gas boiler with a heat pump in Tenby: questions
Can you service a heat pump in Tenby that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Tenby, whoever fitted them. Tell us the make and model when you book.
How soon can you survey a home in Tenby?
Survey dates depend on how busy installers are in Dyfed. We offer the next available dates when you enquire and confirm them in writing.
Do you cover Pembroke Dock as well as Tenby?
Yes. We arrange surveys and installation in Pembroke Dock, which is about 10 miles west of Tenby, and across Dyfed.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
What if my gas boiler is fairly new?
A newer boiler can still be replaced, but the timing is worth weighing. Some owners switch when the boiler needs a major repair; others prefer to plan the change for a convenient time. Across the UK, heat pump installation is zero-rated for VAT until 31 March 2027. A hybrid system, which keeps the boiler alongside a heat pump, is another option, though it is not eligible for the Boiler Upgrade Scheme in England and Wales.