- Area
- Kent
- Postcode district
- TN1
- Nation
- England
- Guide price
- From £9,800 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing a gas boiler with a heat pump in Royal Tunbridge Wells
In Royal Tunbridge Wells, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Rear gardens and side returns in Royal Tunbridge Wells usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours. Installers in Royal Tunbridge Wells take out the old boiler and flue and seal the wall opening as part of the job.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- System or regular boiler homes with an existing airing cupboard
- Households ready to give up gas entirely and drop the standing charge
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Removal of the gas boiler, flue and any loft tanks
- Heat pump cylinder, outdoor unit and weather compensation controls
- Capping of the gas pipe at the boiler position where you are giving up gas
- System flush and radiator upgrades where the design calls for them
- Free survey with heat loss calculation and cylinder siting
Semi-detached and terraced houses in Royal Tunbridge Wells often have an airing cupboard that can be reused for a heat pump cylinder.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Royal Tunbridge Wells quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for replacing a gas boiler with a heat pump in Royal Tunbridge Wells
Guide prices for Royal Tunbridge Wells and the rest of Kent are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £2,300–£5,400 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £3,300–£6,400 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £4,850–£8,450 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £6,900–£11,050 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £9,500–£15,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Royal Tunbridge Wells's winters
Royal Tunbridge Wells sees roughly 7 hours 53 minutes of daylight in late December against 16 hours 34 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
What happens after you enquire in Royal Tunbridge Wells?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Royal Tunbridge Wells home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Royal Tunbridge Wells: questions
How long does installation take in Royal Tunbridge Wells?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Royal Tunbridge Wells home states the expected time.
How soon can you survey a home in Royal Tunbridge Wells?
Survey dates depend on how busy installers are in Kent. We offer the next available dates when you enquire and confirm them in writing.
What size heat pump does a Royal Tunbridge Wells home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Royal Tunbridge Wells home.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.