If you have a combi, there is no cylinder at the moment, so the first question is where one can go. If you have a system or regular boiler, you already have a cylinder, but it is unlikely to suit a heat pump, which needs a larger internal coil to heat water at lower temperatures. Regular boilers also have tanks in the loft that can usually be taken out, freeing space.
Rear gardens and side returns in Kent usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours. Households across Kent moving off gas can have a survey in Kent that compares running costs on realistic assumptions. If your home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Who it suits
- Households ready to give up gas entirely and drop the standing charge
- Boilers that are old, unreliable or due for replacement
- System or regular boiler homes with an existing airing cupboard
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Gas boiler to heat pump prices in Kent
These are guide prices for Kent, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £2,300–£5,400 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £3,300–£6,400 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £4,850–£8,450 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £6,900–£11,050 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £9,500–£15,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in Kent
We cover 24 towns in Kent for replacing a gas boiler with a heat pump. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Broadstairs | CT10 | Margate | 7 h 51 min |
| Maidstone | ME16 | Rochester | 7 h 52 min |
| Gillingham | ME7 | Rochester | 7 h 51 min |
| Royal Tunbridge Wells | TN1 | Tonbridge | 7 h 53 min |
| Folkestone | CT20 | Hythe | 7 h 54 min |
| Margate | CT9 | Broadstairs | 7 h 51 min |
| Ashford | TN24 | Tenterden | 7 h 53 min |
| Canterbury | CT1 | Whitstable | 7 h 52 min |
| Sittingbourne | ME10 | Faversham | 7 h 51 min |
| Gravesend | DA11 | Strood | 7 h 50 min |
| Ramsgate | CT11 | Broadstairs | 7 h 51 min |
| Dover | CT17 | Folkestone | 7 h 53 min |
| Tonbridge | TN9 | Royal Tunbridge Wells | 7 h 53 min |
| Strood | ME2 | Rochester | 7 h 51 min |
| Whitstable | CT5 | Herne Bay | 7 h 51 min |
| Deal | CT14 | Sandwich | 7 h 52 min |
| Sevenoaks | TN13 | Westerham | 7 h 52 min |
| Rochester | ME1 | Strood | 7 h 51 min |
| Herne Bay | CT6 | Whitstable | 7 h 51 min |
| Faversham | ME13 | Whitstable | 7 h 51 min |
| Hythe | CT21 | Folkestone | 7 h 54 min |
| Sandwich | CT13 | Deal | 7 h 52 min |
| Tenterden | TN30 | Ashford | 7 h 54 min |
| Westerham | TN14 | Sevenoaks | 7 h 52 min |
Replacing a gas boiler with a heat pump questions
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.
What if my gas boiler is fairly new?
A newer boiler can still be replaced, but the timing is worth weighing. Some owners switch when the boiler needs a major repair; others prefer to plan the change for a convenient time. Across the UK, heat pump installation is zero-rated for VAT until 31 March 2027. A hybrid system, which keeps the boiler alongside a heat pump, is another option, though it is not eligible for the Boiler Upgrade Scheme in England and Wales.