- Area
- Oxfordshire
- Postcode district
- OX12
- Nation
- England
- Guide price
- From £9,900 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump in Wantage: what to expect
A heat pump suits most Wantage homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
If your Wantage home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob. Many gas-heated homes in Wantage have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Combi owners who can find space for a hot water cylinder
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- System or regular boiler homes with an existing airing cupboard
What's included
- Removal of the gas boiler, flue and any loft tanks
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- System flush and radiator upgrades where the design calls for them
- Capping of the gas pipe at the boiler position where you are giving up gas
- Free survey with heat loss calculation and cylinder siting
Rear gardens and side returns in Wantage usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours.
Grants and rules for heat pumps in England
Homes in Wantage can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for replacing a gas boiler with a heat pump in Wantage
These are guide prices for Oxfordshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,900–£13,000 | £2,400–£5,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,900–£14,050 | £3,400–£6,550 |
| 3 bedroom semi or small detached | 6–9 kW | £12,500–£16,100 | £5,000–£8,600 |
| 4 bedroom detached | 8–12 kW | £14,550–£18,700 | £7,050–£11,200 |
| 5+ bedroom or larger older house | 11–16 kW | £17,150–£23,400 | £9,650–£15,900 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Wantage?
Wantage sees roughly 7 hours 49 minutes of daylight in late December against 16 hours 39 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
From survey to switch-on in Wantage
- Start online with a guide price or call us.
- A home survey in Wantage gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing a gas boiler with a heat pump in Wantage: questions
Do I need new radiators for a heat pump in Wantage?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Wantage home gives a room-by-room list.
How long does a heat pump survey take in Wantage?
A home survey in Wantage usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does a Wantage home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Wantage home.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.