- Area
- Staffordshire
- Postcode district
- DE14
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing a gas boiler with a heat pump in Burton upon Trent
Most homes can run on a heat pump if the system is designed properly, and Burton upon Trent is no different. The key is matching the heat pump and radiators to the home's heat loss.
Rear gardens and side returns in Burton upon Trent usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours. If your Burton upon Trent home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- System or regular boiler homes with an existing airing cupboard
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Boilers that are old, unreliable or due for replacement
What's included
- Capping of the gas pipe at the boiler position where you are giving up gas
- Removal of the gas boiler, flue and any loft tanks
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Heat pump cylinder, outdoor unit and weather compensation controls
- Free survey with heat loss calculation and cylinder siting
Many gas-heated homes in Burton upon Trent have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder.
Grants and rules for heat pumps in England
Homes in Burton upon Trent can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Gas boiler to heat pump costs around Burton upon Trent
Here are typical prices for replacing a gas boiler with a heat pump in Staffordshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Burton upon Trent and what they mean
On the shortest day Burton upon Trent gets about 7 hours 36 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
What happens after you enquire in Burton upon Trent?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Burton upon Trent home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Burton upon Trent: questions
How long does installation take in Burton upon Trent?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Burton upon Trent home states the expected time.
How soon can you survey a home in Burton upon Trent?
Survey dates depend on how busy installers are in Staffordshire. We offer the next available dates when you enquire and confirm them in writing.
What size heat pump does a Burton upon Trent home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Burton upon Trent home.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.