- Area
- Surrey
- Postcode district
- RH6
- Nation
- England
- Guide price
- From £10,150 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump in Horley: what to expect
Homes around Horley range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Rear gardens and side returns in Horley usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours. Households across Surrey moving off gas can have a survey in Horley that compares running costs on realistic assumptions.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- System or regular boiler homes with an existing airing cupboard
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Boilers that are old, unreliable or due for replacement
What's included
- Heat pump cylinder, outdoor unit and weather compensation controls
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- System flush and radiator upgrades where the design calls for them
- Capping of the gas pipe at the boiler position where you are giving up gas
- Free survey with heat loss calculation and cylinder siting
Semi-detached and terraced houses in Horley often have an airing cupboard that can be reused for a heat pump cylinder.
Grants and rules for heat pumps in England
Homes in Horley can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Gas boiler to heat pump costs around Horley
Here are typical prices for replacing a gas boiler with a heat pump in Surrey, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,150–£13,400 | £2,650–£5,900 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,250–£14,450 | £3,750–£6,950 |
| 3 bedroom semi or small detached | 6–9 kW | £12,850–£16,600 | £5,350–£9,100 |
| 4 bedroom detached | 8–12 kW | £15,000–£19,250 | £7,500–£11,750 |
| 5+ bedroom or larger older house | 11–16 kW | £17,650–£24,100 | £10,150–£16,600 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Horley and what they mean
Horley sees roughly 7 hours 53 minutes of daylight in late December against 16 hours 35 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
How installation works in Horley
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Horley home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Horley: questions
How long does a heat pump survey take in Horley?
A home survey in Horley usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does a Horley home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Horley home.
Can you service a heat pump in Horley that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Horley, whoever fitted them. Tell us the make and model when you book.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.