- Area
- Ayrshire
- Postcode district
- KA22
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey for Ardrossan homes
Most homes can run on a heat pump if the system is designed properly, and Ardrossan is no different. The key is matching the heat pump and radiators to the home's heat loss.
Houses in Ardrossan built in different eras can need very different heat pump sizes, which is why each is calculated room by room. For Ardrossan homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Landlords comparing properties before deciding where to switch first
- Anyone getting a heat pump quote, as the first step
- Self-builders and architects who need emitter and system sizes early
What's included
- Room-by-room heat loss calculation using the MCS method
- Hot water cylinder sizing for your household
- Electrical supply and network operator notes
- Outdoor unit siting options and noise check
- Recommended heat pump size and design flow temperature
A surveyor visits your Ardrossan home to measure each room, window and wall before any heat pump is sized.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For an Ardrossan home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Ardrossan property at survey.
What to budget for heat loss surveys in Ardrossan
These are guide prices for Ayrshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
How long is the heating season in Ardrossan?
On the shortest day Ardrossan gets only about 7 hours 01 minutes of daylight, with the sun around 11° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
How installation works in Ardrossan
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Ardrossan home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Ardrossan: questions
Can you service a heat pump in Ardrossan that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Ardrossan, whoever fitted them. Tell us the make and model when you book.
What size heat pump does an Ardrossan home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Ardrossan home.
How soon can you survey a home in Ardrossan?
Survey dates depend on how busy installers are in Ayrshire. We offer the next available dates when you enquire and confirm them in writing.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.