- Area
- Ayrshire
- Postcode district
- KA30
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey in Largs: what to expect
In Largs, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
The survey in Largs includes a check of where the outdoor unit could sit and how its sound would reach neighbours. Design outdoor temperatures for Largs and the wider Ayrshire come from local cold-weather data, not a national average.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Self-builders and architects who need emitter and system sizes early
- Anyone getting a heat pump quote, as the first step
- Homeowners planning insulation or building work who want to know the effect on heat demand
What's included
- Hot water cylinder sizing for your household
- Written results in your quote, or a stand-alone report if you order one
- Electrical supply and network operator notes
- Radiator schedule with any upgrades needed for each room
- Outdoor unit siting options and noise check
Homeowners in Largs thinking about insulation work can use the survey to see how it would change their heat pump size.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Largs home, apply and receive the written offer before the installation date is fixed.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
What to budget for heat loss surveys in Largs
Guide prices for Largs and the rest of Ayrshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Winter daylight and heating in Largs
Largs has about 6 hours 59 minutes of daylight at midwinter against 17 hours 34 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
The steps for heat loss surveys in Largs
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Largs home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Largs: questions
Where would the outdoor unit go on a Largs house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Largs home.
Do you cover Ardrossan as well as Largs?
Yes. We arrange surveys and installation in Ardrossan, which is about 10 miles south of Largs, and across Ayrshire.
How long does a heat pump survey take in Largs?
A home survey in Largs usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Why can't you size the heat pump from my boiler?
Boilers are often much larger than a home's real heat loss, because they are sized for fast hot water and quick warm-ups. Matching a heat pump to the boiler's output usually means an oversized unit that costs more and switches on and off too often. A room-by-room calculation finds the actual heat demand, which is what the heat pump needs to meet.