- Area
- Cambridgeshire
- Postcode district
- PE26
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey in Ramsey: what to expect
Every property in Ramsey is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Houses in Ramsey built in different eras can need very different heat pump sizes, which is why each is calculated room by room. A surveyor visits your Ramsey home to measure each room, window and wall before any heat pump is sized.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Self-builders and architects who need emitter and system sizes early
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Homes with an existing heat pump that seems undersized or expensive to run
What's included
- Room-by-room heat loss calculation using the MCS method
- Written results in your quote, or a stand-alone report if you order one
- Recommended heat pump size and design flow temperature
- Radiator schedule with any upgrades needed for each room
- Hot water cylinder sizing for your household
For Ramsey homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Grants and rules for heat pumps in England
Homes in Ramsey can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for heat loss surveys in Ramsey
Guide prices for Ramsey and the rest of Cambridgeshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£410 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Designing for Ramsey's winters
Ramsey has about 7 hours 40 minutes of daylight at midwinter and 16 hours 49 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
The steps for heat loss surveys in Ramsey
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Ramsey home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Ramsey: questions
How long does installation take in Ramsey?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Ramsey home states the expected time.
What size heat pump does a Ramsey home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Ramsey home.
How long does a heat pump survey take in Ramsey?
A home survey in Ramsey usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.