A heat loss survey is a room-by-room assessment that calculates how much heat your home loses on a cold day, which tells you what size of heat pump you need and whether your radiators can deliver enough warmth. It follows the MCS method, the standard used for heat pump design across the UK, and it is the foundation for every other decision in your quote.
For Cambridgeshire homes with extensions or loft conversions, each part of the house is assessed on its own construction. Houses in Cambridgeshire built in different eras can need very different heat pump sizes, which is why each is calculated room by room. Design outdoor temperatures for Cambridgeshire and the wider Cambridgeshire come from local cold-weather data, not a national average.
Who it suits
- Anyone getting a heat pump quote, as the first step
- Landlords comparing properties before deciding where to switch first
- Self-builders and architects who need emitter and system sizes early
- Homeowners planning insulation or building work who want to know the effect on heat demand
Grants and rules for heat pumps in England
Homes in Cambridgeshire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat loss survey prices in Cambridgeshire
These are guide prices for Cambridgeshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£410 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in Cambridgeshire
We cover 9 towns in Cambridgeshire for heat loss surveys. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Peterborough | PE1 | Whittlesey | 7 h 38 min |
| Cambridge | CB2 | Royston | 7 h 42 min |
| Wisbech | PE13 | March | 7 h 37 min |
| St Neots | PE19 | Huntingdon | 7 h 42 min |
| Huntingdon | PE29 | St Neots | 7 h 41 min |
| March | PE15 | Wisbech | 7 h 39 min |
| Ely | CB6 | March | 7 h 40 min |
| Ramsey | PE26 | Whittlesey | 7 h 40 min |
| Whittlesey | PE7 | Peterborough | 7 h 38 min |
Heat loss surveys questions
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.