- Area
- County Antrim
- Postcode district
- BT39
- Nation
- Northern Ireland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey in Ballyclare: what to expect
A heat pump suits most Ballyclare homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Design outdoor temperatures for Ballyclare and the wider County Antrim come from local cold-weather data, not a national average. Houses in Ballyclare built in different eras can need very different heat pump sizes, which is why each is calculated room by room.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Homes with an existing heat pump that seems undersized or expensive to run
- Landlords comparing properties before deciding where to switch first
- Homeowners planning insulation or building work who want to know the effect on heat demand
What's included
- Room-by-room heat loss calculation using the MCS method
- Written results in your quote, or a stand-alone report if you order one
- Outdoor unit siting options and noise check
- Radiator schedule with any upgrades needed for each room
- Hot water cylinder sizing for your household
Homeowners in Ballyclare thinking about insulation work can use the survey to see how it would change their heat pump size.
Grants and rules for heat pumps in Northern Ireland
The Boiler Upgrade Scheme covers England and Wales only, and there is currently no dedicated heat pump grant for homeowners in Northern Ireland. Our quote for a Ballyclare home is therefore shown without a grant deduction; if support becomes available we will tell you how it applies.
Installing heat pumps has been zero-rated for VAT in Northern Ireland since 1 May 2023, in line with the rest of the UK, until 31 March 2027. Northern Ireland has its own permitted development rules and building regulations, and we confirm what applies to your Ballyclare property at survey.
What to budget for heat loss surveys in Ballyclare
These are guide prices for County Antrim, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£390 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Designing for Ballyclare's winters
Ballyclare sees roughly 7 hours 13 minutes of daylight in December and 17 hours 19 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
What happens after you enquire in Ballyclare?
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Ballyclare; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat loss surveys in Ballyclare: questions
Do you cover Antrim as well as Ballyclare?
Yes. We arrange surveys and installation in Antrim, which is about 8 miles south-west of Ballyclare, and across County Antrim.
What size heat pump does a Ballyclare home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Ballyclare home.
How long does a heat pump survey take in Ballyclare?
A home survey in Ballyclare usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.