- Area
- Glasgow and Dunbartonshire
- Postcode district
- G61
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey for Bearsden homes
Every property in Bearsden is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
For Bearsden homes with extensions or loft conversions, each part of the house is assessed on its own construction. Houses in Bearsden built in different eras can need very different heat pump sizes, which is why each is calculated room by room.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Landlords comparing properties before deciding where to switch first
- Anyone getting a heat pump quote, as the first step
- Homeowners planning insulation or building work who want to know the effect on heat demand
What's included
- Electrical supply and network operator notes
- Radiator schedule with any upgrades needed for each room
- Written results in your quote, or a stand-alone report if you order one
- Hot water cylinder sizing for your household
- Outdoor unit siting options and noise check
The survey in Bearsden includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Bearsden home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Bearsden property at survey.
What to budget for heat loss surveys in Bearsden
Here are typical prices for heat loss surveys in Glasgow and Dunbartonshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Winter daylight and heating in Bearsden
Bearsden has about 6 hours 58 minutes of daylight at midwinter against 17 hours 36 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
How installation works in Bearsden
- Start online with a guide price or call us.
- A home survey in Bearsden gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat loss surveys in Bearsden: questions
Do you cover Milngavie as well as Bearsden?
Yes. We arrange surveys and installation in Milngavie, which is about 2 miles north of Bearsden, and across Glasgow and Dunbartonshire.
Where would the outdoor unit go on a Bearsden house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Bearsden home.
How soon can you survey a home in Bearsden?
Survey dates depend on how busy installers are in Glasgow and Dunbartonshire. We offer the next available dates when you enquire and confirm them in writing.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.