- Area
- Lanarkshire
- Postcode district
- ML4
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey for Bellshill homes
A heat pump suits most Bellshill homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Houses in Bellshill built in different eras can need very different heat pump sizes, which is why each is calculated room by room. Homeowners in Bellshill thinking about insulation work can use the survey to see how it would change their heat pump size.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Homes with an existing heat pump that seems undersized or expensive to run
- Landlords comparing properties before deciding where to switch first
- Homeowners planning insulation or building work who want to know the effect on heat demand
What's included
- Hot water cylinder sizing for your household
- Recommended heat pump size and design flow temperature
- Radiator schedule with any upgrades needed for each room
- Outdoor unit siting options and noise check
- Written results in your quote, or a stand-alone report if you order one
A surveyor visits your Bellshill home to measure each room, window and wall before any heat pump is sized.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Bellshill can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Bellshill property at survey.
What to budget for heat loss surveys in Bellshill
Guide prices for Bellshill and the rest of Lanarkshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Short winter days in Bellshill and what they mean
Bellshill has about 6 hours 59 minutes of daylight at midwinter against 17 hours 34 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
From survey to switch-on in Bellshill
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Bellshill home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Bellshill: questions
How long does a heat pump survey take in Bellshill?
A home survey in Bellshill usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I need new radiators for a heat pump in Bellshill?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Bellshill home gives a room-by-room list.
Where would the outdoor unit go on a Bellshill house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Bellshill home.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.