- Area
- Lanarkshire
- Postcode district
- ML5
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
What to know about heat loss surveys in Coatbridge
The question for a Coatbridge home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Houses in Coatbridge built in different eras can need very different heat pump sizes, which is why each is calculated room by room. Homeowners in Coatbridge thinking about insulation work can use the survey to see how it would change their heat pump size.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Homes with an existing heat pump that seems undersized or expensive to run
- Anyone getting a heat pump quote, as the first step
- Landlords comparing properties before deciding where to switch first
What's included
- Outdoor unit siting options and noise check
- Hot water cylinder sizing for your household
- Electrical supply and network operator notes
- Radiator schedule with any upgrades needed for each room
- Recommended heat pump size and design flow temperature
The survey in Coatbridge includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Coatbridge home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Coatbridge property at survey.
Heat loss survey costs around Coatbridge
These are guide prices for Lanarkshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Short winter days in Coatbridge and what they mean
On the shortest day Coatbridge gets only about 6 hours 59 minutes of daylight, with the sun around 11° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
How installation works in Coatbridge
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Coatbridge home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Coatbridge: questions
How soon can you survey a home in Coatbridge?
Survey dates depend on how busy installers are in Lanarkshire. We offer the next available dates when you enquire and confirm them in writing.
Do I need new radiators for a heat pump in Coatbridge?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Coatbridge home gives a room-by-room list.
Where would the outdoor unit go on a Coatbridge house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Coatbridge home.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.