- Area
- Leicestershire
- Postcode district
- LE67
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Before you book: heat loss surveys in Coalville
The question for a Coalville home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
A surveyor visits your Coalville home to measure each room, window and wall before any heat pump is sized. Houses in Coalville built in different eras can need very different heat pump sizes, which is why each is calculated room by room.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Anyone getting a heat pump quote, as the first step
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Self-builders and architects who need emitter and system sizes early
What's included
- Radiator schedule with any upgrades needed for each room
- Hot water cylinder sizing for your household
- Written results in your quote, or a stand-alone report if you order one
- Room-by-room heat loss calculation using the MCS method
- Recommended heat pump size and design flow temperature
Homeowners in Coalville thinking about insulation work can use the survey to see how it would change their heat pump size.
Grants and rules for heat pumps in England
Homes in Coalville can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for heat loss surveys in Coalville
Here are typical prices for heat loss surveys in Leicestershire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Short winter days in Coalville and what they mean
Coalville has about 7 hours 37 minutes of daylight at midwinter and 16 hours 53 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
From survey to switch-on in Coalville
- Start online with a guide price or call us.
- A home survey in Coalville gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat loss surveys in Coalville: questions
Can you service a heat pump in Coalville that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Coalville, whoever fitted them. Tell us the make and model when you book.
How soon can you survey a home in Coalville?
Survey dates depend on how busy installers are in Leicestershire. We offer the next available dates when you enquire and confirm them in writing.
What size heat pump does a Coalville home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Coalville home.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.