- Area
- Perth and Kinross
- Postcode district
- KY13
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey for Kinross homes
Homes around Kinross range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Houses in Kinross built in different eras can need very different heat pump sizes, which is why each is calculated room by room. Design outdoor temperatures for Kinross and the wider Perth and Kinross come from local cold-weather data, not a national average.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Self-builders and architects who need emitter and system sizes early
- Homes with an existing heat pump that seems undersized or expensive to run
What's included
- Written results in your quote, or a stand-alone report if you order one
- Outdoor unit siting options and noise check
- Radiator schedule with any upgrades needed for each room
- Electrical supply and network operator notes
- Recommended heat pump size and design flow temperature
Homeowners in Kinross thinking about insulation work can use the survey to see how it would change their heat pump size.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Kinross home, apply and receive the written offer before the installation date is fixed.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
Guide prices for heat loss surveys in Kinross
These are guide prices for Perth and Kinross, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Short winter days in Kinross and what they mean
Kinross has about 6 hours 54 minutes of daylight at midwinter against 17 hours 40 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
What happens after you enquire in Kinross?
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Kinross; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat loss surveys in Kinross: questions
How long does a heat pump survey take in Kinross?
A home survey in Kinross usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How long does installation take in Kinross?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Kinross home states the expected time.
Where would the outdoor unit go on a Kinross house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Kinross home.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.