- Area
- Somerset
- Postcode district
- BS31
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Before you book: heat loss surveys in Keynsham
The question for a Keynsham home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Design outdoor temperatures for Keynsham and the wider Somerset come from local cold-weather data, not a national average. Houses in Keynsham built in different eras can need very different heat pump sizes, which is why each is calculated room by room.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Landlords comparing properties before deciding where to switch first
- Homes with an existing heat pump that seems undersized or expensive to run
- Anyone getting a heat pump quote, as the first step
What's included
- Room-by-room heat loss calculation using the MCS method
- Recommended heat pump size and design flow temperature
- Hot water cylinder sizing for your household
- Radiator schedule with any upgrades needed for each room
- Outdoor unit siting options and noise check
For Keynsham homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Keynsham quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for heat loss surveys in Keynsham
Guide prices for Keynsham and the rest of Somerset are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Designing for Keynsham's winters
Keynsham sees roughly 7 hours 50 minutes of daylight in late December against 16 hours 37 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
How installation works in Keynsham
- Start online with a guide price or call us.
- A home survey in Keynsham gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat loss surveys in Keynsham: questions
Do you cover Kingswood as well as Keynsham?
Yes. We arrange surveys and installation in Kingswood, which is about 3 miles north of Keynsham, and across Somerset.
What size heat pump does a Keynsham home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Keynsham home.
How long does a heat pump survey take in Keynsham?
A home survey in Keynsham usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.