For installation enquiries the survey is free, and the results go straight into your written quote. If you want the calculation on its own, for example to plan building work or to compare quotes, a stand-alone heat loss survey and report has a guide price of £150–£400, including VAT.
Design outdoor temperatures for Somerset and the wider Somerset come from local cold-weather data, not a national average. Houses in Somerset built in different eras can need very different heat pump sizes, which is why each is calculated room by room. Homeowners in Somerset thinking about insulation work can use the survey to see how it would change their heat pump size.
Who it suits
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Landlords comparing properties before deciding where to switch first
- Anyone getting a heat pump quote, as the first step
- Self-builders and architects who need emitter and system sizes early
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat loss survey prices in Somerset
These are guide prices for Somerset, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in Somerset
We cover 17 towns in Somerset for heat loss surveys. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Bath | BA1 | Keynsham | 7 h 51 min |
| Weston-super-Mare | BS23 | Burnham-on-Sea | 7 h 51 min |
| Taunton | TA1 | Bridgwater | 7 h 54 min |
| Yeovil | BA20 | Sherborne | 7 h 55 min |
| Bridgwater | TA6 | Burnham-on-Sea | 7 h 53 min |
| Portishead | BS20 | Nailsea | 7 h 50 min |
| Frome | BA11 | Warminster | 7 h 52 min |
| Burnham-on-Sea | TA8 | Weston-super-Mare | 7 h 52 min |
| Clevedon | BS21 | Nailsea | 7 h 50 min |
| Nailsea | BS48 | Portishead | 7 h 50 min |
| Keynsham | BS31 | Kingswood | 7 h 50 min |
| Chard | TA20 | Taunton | 7 h 56 min |
| Glastonbury | BA6 | Street | 7 h 53 min |
| Minehead | TA24 | Burnham-on-Sea | 7 h 53 min |
| Shepton Mallet | BA4 | Wells | 7 h 53 min |
| Street | BA16 | Glastonbury | 7 h 53 min |
| Wells | BA5 | Shepton Mallet | 7 h 52 min |
Heat loss surveys questions
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
Why can't you size the heat pump from my boiler?
Boilers are often much larger than a home's real heat loss, because they are sized for fast hot water and quick warm-ups. Matching a heat pump to the boiler's output usually means an oversized unit that costs more and switches on and off too often. A room-by-room calculation finds the actual heat demand, which is what the heat pump needs to meet.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.