- Area
- Warwickshire
- Postcode district
- CV9
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey for Atherstone homes
The question for an Atherstone home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
A surveyor visits your Atherstone home to measure each room, window and wall before any heat pump is sized. Design outdoor temperatures for Atherstone and the wider Warwickshire come from local cold-weather data, not a national average.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Anyone getting a heat pump quote, as the first step
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Homes with an existing heat pump that seems undersized or expensive to run
What's included
- Hot water cylinder sizing for your household
- Radiator schedule with any upgrades needed for each room
- Recommended heat pump size and design flow temperature
- Room-by-room heat loss calculation using the MCS method
- Written results in your quote, or a stand-alone report if you order one
The survey in Atherstone includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Grants and rules for heat pumps in England
Homes in Atherstone can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat loss survey costs around Atherstone
The ranges below are typical installed prices for homes in Warwickshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Atherstone can need quite different radiators and pipework.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Designing for Atherstone's winters
Atherstone has about 7 hours 38 minutes of daylight at midwinter and 16 hours 51 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
From survey to switch-on in Atherstone
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Atherstone home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Atherstone: questions
Where would the outdoor unit go on an Atherstone house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Atherstone home.
Can you service a heat pump in Atherstone that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Atherstone, whoever fitted them. Tell us the make and model when you book.
How long does installation take in Atherstone?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for an Atherstone home states the expected time.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.