For installation enquiries the survey is free, and the results go straight into your written quote. If you want the calculation on its own, for example to plan building work or to compare quotes, a stand-alone heat loss survey and report has a guide price of £150–£400, including VAT.
A surveyor visits your home to measure each room, window and wall before any heat pump is sized. Homeowners in Worcestershire thinking about insulation work can use the survey to see how it would change their heat pump size. The survey in Worcestershire includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Who it suits
- Homes with an existing heat pump that seems undersized or expensive to run
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Landlords comparing properties before deciding where to switch first
- Self-builders and architects who need emitter and system sizes early
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat loss survey prices in Worcestershire
Here are typical prices for heat loss surveys in Worcestershire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in Worcestershire
We cover 11 towns in Worcestershire for heat loss surveys. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Worcester | WR1 | Droitwich Spa | 7 h 42 min |
| Redditch | B97 | Bromsgrove | 7 h 41 min |
| Kidderminster | DY11 | Stourport-on-Severn | 7 h 40 min |
| Malvern | WR14 | Upton-upon-Severn | 7 h 43 min |
| Bromsgrove | B61 | Redditch | 7 h 41 min |
| Evesham | WR11 | Pershore | 7 h 43 min |
| Droitwich Spa | WR9 | Bromsgrove | 7 h 42 min |
| Stourport-on-Severn | DY13 | Kidderminster | 7 h 41 min |
| Pershore | WR10 | Evesham | 7 h 43 min |
| Tenbury Wells | WR15 | Ludlow | 7 h 41 min |
| Upton-upon-Severn | WR8 | Malvern | 7 h 44 min |
Heat loss surveys questions
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.