Getting the size right matters. An undersized heat pump struggles in cold weather, while an oversized one costs more to buy and can switch on and off frequently, which wastes energy and wears components. Sizing from a rule of thumb, or simply matching the old boiler's output, is a common cause of poorly performing systems. A measured, room-by-room design avoids both problems and shows the reasoning behind every figure.
A surveyor visits your home to measure each room, window and wall before any heat pump is sized. Design outdoor temperatures for Gloucestershire and the wider Gloucestershire come from local cold-weather data, not a national average. Homeowners in Gloucestershire thinking about insulation work can use the survey to see how it would change their heat pump size.
Who it suits
- Landlords comparing properties before deciding where to switch first
- Self-builders and architects who need emitter and system sizes early
- Anyone getting a heat pump quote, as the first step
- Homeowners planning insulation or building work who want to know the effect on heat demand
Grants and rules for heat pumps in England
Homes in Gloucestershire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat loss survey prices in Gloucestershire
Here are typical prices for heat loss surveys in Gloucestershire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in Gloucestershire
We cover 12 towns in Gloucestershire for heat loss surveys. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Gloucester | GL1 | Cheltenham | 7 h 46 min |
| Cheltenham | GL50 | Tewkesbury | 7 h 45 min |
| Stroud | GL6 | Dursley | 7 h 47 min |
| Kingswood | BS15 | Mangotsfield | 7 h 50 min |
| Mangotsfield | BS16 | Kingswood | 7 h 50 min |
| Yate | BS37 | Mangotsfield | 7 h 49 min |
| Tewkesbury | GL20 | Cheltenham | 7 h 44 min |
| Cirencester | GL7 | Stroud | 7 h 47 min |
| Dursley | GL11 | Lydney | 7 h 48 min |
| Lydney | GL15 | Dursley | 7 h 47 min |
| Stow-on-the-Wold | GL56 | Chipping Norton | 7 h 45 min |
| Thornbury | BS35 | Yate | 7 h 48 min |
Heat loss surveys questions
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.