Most heat pump cylinders are unvented, meaning they run at mains water pressure and give strong flow from every tap without a cold water tank in the loft. Unvented cylinders have safety controls that must be fitted and checked by someone qualified to work on them. We size the cylinder from your household and bathrooms, confirm your mains water supply can support it, and plan the space, pipework and discharge route at the survey.
Older houses in Perth and Kinross with loft tanks can usually have them removed when an unvented cylinder is fitted. We check mains water pressure and flow at each Perth and Kinross property before choosing a cylinder. Many homes in Perth and Kinross with combi boilers have no airing cupboard, so the survey looks for the most practical cylinder space.
Who it suits
- Homes replacing a combi boiler that need space found for a cylinder
- Larger families or homes with two or more bathrooms
- Every air-to-water heat pump installation, whatever the existing boiler
- Households with older vented cylinders and loft tanks who want mains-pressure showers
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a home in Perth and Kinross, apply and receive the written offer before the installation date is fixed.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
Heat pump hot water cylinders prices in Perth and Kinross
The ranges below are typical installed prices for homes in Perth and Kinross, including VAT. A survey sets the exact figure, because two similar-looking houses in Perth and Kinross can need quite different radiators and pipework.
| Work | Guide price |
|---|---|
| Heat pump hot water cylinder (supplied and fitted) | £1,200–£2,200 |
Supplied and fitted, inc VAT. Included in every full system price.
Towns we cover in Perth and Kinross
We cover 7 towns in Perth and Kinross for heat pump hot water cylinders. Each links to local guide prices and the grant position for Scotland.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Perth | PH2 | Auchterarder | 6 h 51 min |
| Aberfeldy | PH15 | Pitlochry | 6 h 48 min |
| Auchterarder | PH3 | Crieff | 6 h 53 min |
| Blairgowrie | PH10 | Perth | 6 h 48 min |
| Crieff | PH7 | Auchterarder | 6 h 52 min |
| Kinross | KY13 | Dunfermline | 6 h 54 min |
| Pitlochry | PH16 | Aberfeldy | 6 h 47 min |
Heat pump hot water cylinders questions
Will I run out of hot water with a heat pump?
Not if the cylinder is sized to how your household uses hot water. Unlike a combi, hot water is stored, so very heavy use, such as several long showers back to back, can use up the stored volume before it reheats. Sizing for your busiest period, and timing reheats sensibly, avoids this for most homes.
How much does a heat pump cylinder cost?
A heat pump hot water cylinder has a guide price of £1,200–£2,200, installed and including VAT. In a full heat pump installation the cylinder is already included in the system guide price, so this figure mainly applies where a cylinder is replaced on its own. Capacity, coil design and the pipework needed affect where your price sits.
Can I keep my existing hot water cylinder with a heat pump?
Usually not. Cylinders designed for boilers have a small coil that cannot transfer heat quickly at heat pump temperatures, so the water would reheat slowly and efficiency would suffer. A heat pump cylinder has a much larger coil. The new cylinder can often go in the same cupboard, though, if there is enough height and floor space.
I have a combi boiler. Where will the cylinder go?
Moving from a combi to a heat pump means finding space for a cylinder, usually somewhere around 600 mm square and up to about 2 m tall. Common choices are a bedroom or landing cupboard, a utility room, under the stairs or an integral garage. The surveyor looks at your layout and suggests options, including slimline models where space is tight.