Every air-to-water heat pump installation needs a cylinder, because there is no heat pump equivalent of a combi boiler that heats water instantly. If you have a combi now, the main design question is where the cylinder will go. If you already have a cylinder, it will almost always need replacing with a heat pump model, though the same cupboard can often be reused if it is large enough.
Many homes in Glasgow and Dunbartonshire with combi boilers have no airing cupboard, so the survey looks for the most practical cylinder space. Cylinder sizes for Glasgow and Dunbartonshire homes are based on the people living there and the bathrooms in daily use. Older houses in Glasgow and Dunbartonshire with loft tanks can usually have them removed when an unvented cylinder is fitted.
Who it suits
- Every air-to-water heat pump installation, whatever the existing boiler
- Larger families or homes with two or more bathrooms
- Homes replacing a combi boiler that need space found for a cylinder
- Households with older vented cylinders and loft tanks who want mains-pressure showers
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a home in Glasgow and Dunbartonshire, apply and receive the written offer before the installation date is fixed.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
Heat pump hot water cylinders prices in Glasgow and Dunbartonshire
These are guide prices for Glasgow and Dunbartonshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Work | Guide price |
|---|---|
| Heat pump hot water cylinder (supplied and fitted) | £1,200–£2,200 |
Supplied and fitted, inc VAT. Included in every full system price.
Towns we cover in Glasgow and Dunbartonshire
We cover 8 towns in Glasgow and Dunbartonshire for heat pump hot water cylinders. Each links to local guide prices and the grant position for Scotland.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Glasgow | G2 | Bishopbriggs | 6 h 59 min |
| Bearsden | G61 | Milngavie | 6 h 58 min |
| Clydebank | G81 | Bearsden | 6 h 58 min |
| Bishopbriggs | G64 | Glasgow | 6 h 58 min |
| Dumbarton | G82 | Alexandria | 6 h 57 min |
| Kirkintilloch | G66 | Bishopbriggs | 6 h 58 min |
| Alexandria | G83 | Dumbarton | 6 h 57 min |
| Milngavie | G62 | Bearsden | 6 h 58 min |
Heat pump hot water cylinders questions
Do I need good water pressure for an unvented cylinder?
Yes. An unvented cylinder runs at mains pressure, so it needs enough incoming pressure and flow to supply your taps and showers well. We measure your mains supply at the survey. If flow is low, options include a different cylinder type or an upgrade to the incoming supply pipe, which we explain before you commit.
I have a combi boiler. Where will the cylinder go?
Moving from a combi to a heat pump means finding space for a cylinder, usually somewhere around 600 mm square and up to about 2 m tall. Common choices are a bedroom or landing cupboard, a utility room, under the stairs or an integral garage. The surveyor looks at your layout and suggests options, including slimline models where space is tight.
How much does a heat pump cylinder cost?
A heat pump hot water cylinder has a guide price of £1,200–£2,200, installed and including VAT. In a full heat pump installation the cylinder is already included in the system guide price, so this figure mainly applies where a cylinder is replaced on its own. Capacity, coil design and the pipework needed affect where your price sits.
Will I run out of hot water with a heat pump?
Not if the cylinder is sized to how your household uses hot water. Unlike a combi, hot water is stored, so very heavy use, such as several long showers back to back, can use up the stored volume before it reheats. Sizing for your busiest period, and timing reheats sensibly, avoids this for most homes.