- Area
- Aberdeenshire and Moray
- Postcode district
- AB42
- Nation
- Scotland
- Guide price
- From £260 inc VAT
- Survey
- Free for installation enquiries
Before you book: heat pump radiator upgrades in Peterhead
Every property in Peterhead is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
In Peterhead, bay-windowed front rooms are often the rooms that need a larger radiator when moving to a heat pump. Many older houses in Peterhead still have their original single-panel radiators, so the survey checks each one against the room it heats.
We size each radiator to your room-by-room heat loss so a heat pump can heat your home at a low, efficient flow temperature.
- Extensions and loft conversions with large areas of glazing
- Homeowners who want the lowest practical flow temperature for efficiency
- Homes switching from a gas, oil or LPG boiler to a heat pump
What's included
- Supply and fitting of new radiators, valves and brackets
- Pipework checks and any agreed pipe upgrades
- Making good around brackets and pipe routes, with any decorating agreed in your quote
- Draining, refilling, cleaning and inhibitor treatment of the heating system
- Balancing every radiator so each room heats evenly
Radiator fitting in Peterhead is scheduled with your heat pump installation so the system is drained only once.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Peterhead can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Peterhead property at survey.
Guide prices for heat pump radiator upgrades in Peterhead
The ranges below are typical installed prices for homes in Aberdeenshire and Moray, including VAT. A survey sets the exact figure, because two similar-looking houses in Peterhead can need quite different radiators and pipework.
| Work | Guide price |
|---|---|
| Replacement radiator, sized for a heat pump (each, fitted) | £260–£460 |
| Upgrade of about 10 radiators | £2,050–£5,150 |
| Pipework upgrade (e.g. microbore to larger bore) | £1,550–£3,600 |
Installed, inc VAT. The survey lists which radiators need changing.
How long is the heating season in Peterhead?
Peterhead has about 6 hours 35 minutes of daylight at midwinter against 18 hours 02 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
From survey to switch-on in Peterhead
- Start online with a guide price or call us.
- A home survey in Peterhead gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat pump radiator upgrades in Peterhead: questions
What size heat pump does a Peterhead home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Peterhead home.
Do you cover Ellon as well as Peterhead?
Yes. We arrange surveys and installation in Ellon, which is about 14 miles south-west of Peterhead, and across Aberdeenshire and Moray.
Do I need new radiators for a heat pump in Peterhead?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Peterhead home gives a room-by-room list.
Can radiators be changed without draining the whole system?
Radiator changes normally mean draining the heating system, which is why they are usually done as part of the heat pump installation. The system is then refilled, flushed, treated with inhibitor and balanced. Doing the radiators at the same time avoids draining twice and means the new radiators are commissioned with the heat pump.
Can I keep my radiators and just run the heat pump hotter?
You can, but it usually costs more to run. Every extra degree of flow temperature reduces a heat pump's efficiency, so a system designed at 55°C uses noticeably more electricity than one at 45°C for the same heat. A few well-chosen radiator upgrades often let the whole house run cooler, which is the better long-term trade.