- Area
- Kent
- Postcode district
- ME2
- Nation
- England
- Guide price
- From £260 inc VAT
- Survey
- Free for installation enquiries
Heat pump radiators for Strood homes
Most homes can run on a heat pump if the system is designed properly, and Strood is no different. The key is matching the heat pump and radiators to the home's heat loss.
Radiator fitting in Strood is scheduled with your heat pump installation so the system is drained only once. Many older houses in Strood still have their original single-panel radiators, so the survey checks each one against the room it heats.
We size each radiator to your room-by-room heat loss so a heat pump can heat your home at a low, efficient flow temperature.
- Rooms that already feel slow to heat, such as bay-windowed living rooms
- Homeowners who want the lowest practical flow temperature for efficiency
- Homes switching from a gas, oil or LPG boiler to a heat pump
What's included
- Pipework checks and any agreed pipe upgrades
- Supply and fitting of new radiators, valves and brackets
- A radiator schedule showing which radiators stay, which change and their outputs
- Room-by-room heat loss figures for every heated room
- Draining, refilling, cleaning and inhibitor treatment of the heating system
We plan radiator upgrades in Strood so floorboards are lifted only where pipework genuinely needs changing.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Strood quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pump radiators prices in Strood
Here are typical prices for heat pump radiator upgrades in Kent, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Work | Guide price |
|---|---|
| Replacement radiator, sized for a heat pump (each, fitted) | £260–£460 |
| Upgrade of about 10 radiators | £2,050–£5,150 |
| Pipework upgrade (e.g. microbore to larger bore) | £1,550–£3,600 |
Installed, inc VAT. The survey lists which radiators need changing.
Short winter days in Strood and what they mean
Strood sees roughly 7 hours 51 minutes of daylight in late December against 16 hours 37 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
From survey to switch-on in Strood
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Strood home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat pump radiator upgrades in Strood: questions
Do you cover Rochester as well as Strood?
Yes. We arrange surveys and installation in Rochester, which is about a mile east of Strood, and across Kent.
How long does a heat pump survey take in Strood?
A home survey in Strood usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Strood house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Strood home.
Can radiators be changed without draining the whole system?
Radiator changes normally mean draining the heating system, which is why they are usually done as part of the heat pump installation. The system is then refilled, flushed, treated with inhibitor and balanced. Doing the radiators at the same time avoids draining twice and means the new radiators are commissioned with the heat pump.
Will new radiators be much bigger than my old ones?
Sometimes, but not always. Swapping a single-panel radiator for a double or triple-panel model of the same height and width can raise output substantially, adding only depth from the wall. Where that is not enough, a longer or taller radiator, or a second radiator in the room, may be needed. We agree sizes and positions with you before anything is ordered.