- Area
- Oxfordshire
- Postcode district
- OX28
- Nation
- England
- Guide price
- From £260 inc VAT
- Survey
- Free for installation enquiries
Heat pump radiators for Witney homes
A heat pump suits most Witney homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
For period homes in Witney and across Oxfordshire, column radiators can keep the character of a room while giving enough heat at low temperatures. We plan radiator upgrades in Witney so floorboards are lifted only where pipework genuinely needs changing.
We size each radiator to your room-by-room heat loss so a heat pump can heat your home at a low, efficient flow temperature.
- Rooms with little wall space, where a fan-assisted radiator fits better
- Homes switching from a gas, oil or LPG boiler to a heat pump
- Rooms that already feel slow to heat, such as bay-windowed living rooms
What's included
- Making good around brackets and pipe routes, with any decorating agreed in your quote
- Pipework checks and any agreed pipe upgrades
- Room-by-room heat loss figures for every heated room
- Balancing every radiator so each room heats evenly
- A radiator schedule showing which radiators stay, which change and their outputs
Extensions and kitchen-diners around Witney with large glazed areas get their own radiator calculation.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Witney quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for heat pump radiator upgrades in Witney
The ranges below are typical installed prices for homes in Oxfordshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Witney can need quite different radiators and pipework.
| Work | Guide price |
|---|---|
| Replacement radiator, sized for a heat pump (each, fitted) | £260–£470 |
| Upgrade of about 10 radiators | £2,100–£5,200 |
| Pipework upgrade (e.g. microbore to larger bore) | £1,550–£3,650 |
Installed, inc VAT. The survey lists which radiators need changing.
Designing for Witney's winters
Witney has about 7 hours 47 minutes of daylight at midwinter and 16 hours 42 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
What happens after you enquire in Witney?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Witney home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat pump radiator upgrades in Witney: questions
Can you service a heat pump in Witney that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Witney, whoever fitted them. Tell us the make and model when you book.
Do I need new radiators for a heat pump in Witney?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Witney home gives a room-by-room list.
What size heat pump does a Witney home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Witney home.
Can I keep my radiators and just run the heat pump hotter?
You can, but it usually costs more to run. Every extra degree of flow temperature reduces a heat pump's efficiency, so a system designed at 55°C uses noticeably more electricity than one at 45°C for the same heat. A few well-chosen radiator upgrades often let the whole house run cooler, which is the better long-term trade.
Do I need new radiators for a heat pump?
Not necessarily: many homes keep most of their radiators and replace only a few. The heat loss survey checks each room against its existing radiator at the planned flow temperature. Rooms with large windows, high ceilings or extensions are the usual candidates for an upgrade, while bedrooms often need no change. Your radiator schedule lists every decision.