Pairing a heat pump with solar PV means using electricity generated by panels on your roof to run the heat pump, so less is bought from the grid. Solar PV (photovoltaic) panels turn daylight into electricity, and a heat pump is one of the largest electrical loads in an electrically heated home, so the two are often planned together.
Roof orientation and shading vary street by street in Northumberland, so solar is assessed on each roof individually. Homes in Northumberland with existing panels can often have the heat pump set to heat water from their daytime output. For Northumberland households out during the day, a battery can carry daytime solar into the evening heating period.
Who it suits
- Homes with existing solar PV that currently export much of their output
- Homes with a roof facing anywhere from east through south to west, with little shading
- Homeowners planning a heat pump who want to add panels at the same time
- Households at home during the day or with flexible hot water timing
Grants and rules for heat pumps in England
Homes in Northumberland can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Prices
Solar panels and batteries are quoted separately after a roof survey. For heat pump system prices see the guide prices.
Towns we cover in Northumberland
We cover 10 towns in Northumberland for heat pumps with solar panels and batteries. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Blyth | NE24 | Bedlington | 7 h 08 min |
| Cramlington | NE23 | Bedlington | 7 h 09 min |
| Ashington | NE63 | Bedlington | 7 h 08 min |
| Bedlington | NE22 | Cramlington | 7 h 08 min |
| Alnwick | NE66 | Morpeth | 7 h 05 min |
| Berwick-upon-Tweed | TD15 | Alnwick | 7 h 00 min |
| Hexham | NE46 | Prudhoe | 7 h 10 min |
| Morpeth | NE61 | Bedlington | 7 h 08 min |
| Ponteland | NE20 | Cramlington | 7 h 09 min |
| Prudhoe | NE42 | Newburn | 7 h 10 min |
Heat pumps with solar panels and batteries questions
Is a solar diverter useful with a heat pump?
It can be, but less so than with a gas boiler. A diverter heats water through the immersion heater, which turns one unit of electricity into one unit of heat, while a heat pump typically makes around three. Scheduling the heat pump to heat water at midday usually uses solar more efficiently, with a diverter adding top-ups on very sunny days.
Should I fit solar panels before or after a heat pump?
Either order works, but planning both together helps. Knowing the heat pump's electricity use helps size the panels and any battery, and the electrical work for both can be coordinated, including the consumer unit and any notification to the network operator. If you already have panels, the heat pump controls can be set to use their output for hot water.
Do I need a battery to benefit from solar with a heat pump?
No. Without a battery you can still use solar generation directly by timing hot water heating for the middle of the day. A battery adds flexibility by storing surplus for the evening, or by charging from a cheaper overnight tariff in winter. Whether it suits you depends on how much you would otherwise export and on your tariff.
Can my roof take solar panels?
Most pitched roofs in sound condition can take solar panels, but every roof needs checking. The survey looks at orientation, pitch, shading, roof covering and structure, plus access for scaffolding. Flat roofs can use angled mounting frames. The survey also checks where the inverter and any battery would go and how cables would reach your consumer unit.