A high-temperature heat pump is an air-to-water heat pump able to produce flow temperatures of around 65–75°C, close to what a gas or oil boiler delivers, instead of the 35–50°C at which standard heat pumps run most efficiently. That means existing radiators can often heat rooms much as they do now, without being replaced with larger ones.
Older homes around North Yorkshire often need a discreet unit position, such as a rear courtyard, which the survey looks for first. A survey in North Yorkshire can compare a high-temperature unit with upsizing a few radiators, for homes anywhere in North Yorkshire. In North Yorkshire, rooms with large bay windows are often the ones where radiator output is checked most carefully.
Who it suits
- Homes with microbore pipework that would be disruptive to replace
- Owners who want fewer changes inside the house
- Period and listed homes where the radiators are part of the character
- Older homes where insulation improvements are limited
Grants and rules for heat pumps in England
Homes in North Yorkshire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
High-temperature heat pumps prices in North Yorkshire
The ranges below are typical installed prices for homes in North Yorkshire, including VAT. A survey sets the exact figure, because two similar-looking houses in North Yorkshire can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. A high-temperature unit typically adds £1,500–£3,000.
Towns we cover in North Yorkshire
We cover 15 towns in North Yorkshire for high-temperature heat pumps. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| York | YO1 | Selby | 7 h 23 min |
| Middlesbrough | TS1 | Thornaby-on-Tees | 7 h 15 min |
| Harrogate | HG2 | Knaresborough | 7 h 22 min |
| Scarborough | YO12 | Whitby | 7 h 19 min |
| Redcar | TS10 | Middlesbrough | 7 h 15 min |
| Selby | YO8 | Howden | 7 h 25 min |
| Thornaby-on-Tees | TS17 | Yarm | 7 h 16 min |
| Yarm | TS15 | Thornaby-on-Tees | 7 h 16 min |
| Northallerton | DL7 | Thirsk | 7 h 18 min |
| Ripon | HG4 | Knaresborough | 7 h 20 min |
| Knaresborough | HG5 | Harrogate | 7 h 22 min |
| Malton | YO17 | Pocklington | 7 h 20 min |
| Skipton | BD23 | Keighley | 7 h 23 min |
| Thirsk | YO7 | Northallerton | 7 h 19 min |
| Whitby | YO22 | Scarborough | 7 h 16 min |
High-temperature heat pumps questions
Do I still need a hot water cylinder?
Yes. Like other air-to-water heat pumps, a high-temperature unit heats a stored cylinder rather than supplying hot water on demand. Its higher output temperature can help the cylinder reach the temperature needed for its periodic legionella cycle with less reliance on the immersion heater. The cylinder is sized for your household at survey.
Are high-temperature heat pumps less efficient?
Yes, when they run hot. Every heat pump uses more electricity per unit of heat as the flow temperature rises, so a unit running at 70°C is less efficient than one running at 45°C. With weather compensation it runs cooler for much of the year, which narrows the gap. The design aims to keep the maximum temperature as low as your radiators allow.
Can a heat pump work with my existing radiators?
Often, yes, especially with a high-temperature unit. Standard heat pumps run most efficiently at 35–50°C, so some radiators may be too small at those temperatures. A high-temperature unit can run at around 65–75°C, so existing radiators can usually heat rooms much as they do with a boiler, at a cost in efficiency. The survey checks every radiator against its room's heat loss.
Is a high-temperature heat pump right for a listed building?
It can be, because it reduces the need to replace period radiators or lift historic floors for new pipework. The outdoor unit position still matters: in England, listed buildings need listed building consent for external works, and the other nations have their own rules. We check what applies at survey and look for discreet positions, such as a rear courtyard or behind an outbuilding.