A heat pump for a let property is a full air source heating and hot water system designed around how tenants use the home, with installation, handover and servicing planned to suit both landlord and tenant. Landlords follow the same survey and design process as owner-occupiers, and in England and Wales they can use the Boiler Upgrade Scheme for their let homes.
Landlords with let homes in County Durham can have each property surveyed and quoted separately or as a group. Flats in County Durham and across County Durham need freeholder consent checked early, before the outdoor unit position is fixed. Shared houses in County Durham usually need larger hot water storage to cope with busy mornings.
Who it suits
- Landlords who want to remove gas appliances from a property
- Properties between tenancies, when access and disruption are easier to manage
- HMOs with high hot water demand that need careful cylinder sizing
- Landlords in England and Wales replacing gas, oil or electric heating in let homes
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat pumps for landlords prices in County Durham
The ranges below are typical installed prices for homes in County Durham, including VAT. A survey sets the exact figure, because two similar-looking houses in County Durham can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £1,700–£4,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £2,700–£5,600 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £4,150–£7,550 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £6,100–£9,950 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £8,500–£14,350 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in County Durham
We cover 14 towns in County Durham for landlords and let properties. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Darlington | DL1 | Newton Aycliffe | 7 h 16 min |
| Hartlepool | TS26 | Peterlee | 7 h 14 min |
| Stockton-on-Tees | TS18 | Billingham | 7 h 15 min |
| Durham | DH1 | Chester-le-Street | 7 h 13 min |
| Chester-le-Street | DH2 | Stanley | 7 h 12 min |
| Billingham | TS23 | Stockton-on-Tees | 7 h 15 min |
| Stanley | DH9 | Chester-le-Street | 7 h 12 min |
| Consett | DH8 | Stanley | 7 h 12 min |
| Newton Aycliffe | DL5 | Bishop Auckland | 7 h 15 min |
| Bishop Auckland | DL14 | Newton Aycliffe | 7 h 14 min |
| Seaham | SR7 | Peterlee | 7 h 12 min |
| Peterlee | SR8 | Seaham | 7 h 13 min |
| Barnard Castle | DL12 | Bishop Auckland | 7 h 16 min |
| Sedgefield | TS21 | Newton Aycliffe | 7 h 14 min |
Landlords and let properties questions
Can a heat pump go on a block of flats or an HMO?
Often, yes, but it needs more planning. In flats, the outdoor unit position and pipe routes usually need freeholder or management company consent, and some positions need planning permission depending on the nation, which we check at survey. In HMOs, hot water demand is higher, so cylinder sizing is critical. Larger buildings may suit a commercial design instead.
How much does a heat pump cost for a rental property?
A full air-to-water system for a typical 3 bedroom home has an installed guide price of £12,000–£15,500, including VAT, or £4,500–£8,000 after the standard Boiler Upgrade Scheme grant in England and Wales. Flats and small terraces typically sit at £9,500–£12,500. Your written quote fixes the price after the survey.
Will a heat pump improve my property's EPC rating?
It can, but the effect varies. EPC ratings depend on insulation, glazing, the heating system and how the assessment is modelled, so a heat pump in a poorly insulated home may change the rating less than expected. Check the current letting standards for your nation, and ask an EPC assessor to model the change if the rating matters for your plans.
Can I install a heat pump while tenants are living in the property?
Yes. Most installations typically take 2–4 days on site, with heating and hot water off for part of that time. We agree dates and access with you, provide written details to pass to tenants, and plan the changeover to keep downtime short. Preparing the outdoor unit and cylinder first shortens the period without heating.