A heat pump for a let property is a full air source heating and hot water system designed around how tenants use the home, with installation, handover and servicing planned to suit both landlord and tenant. Landlords follow the same survey and design process as owner-occupiers, and in England and Wales they can use the Boiler Upgrade Scheme for their let homes.
Landlords with let homes in Lancashire can have each property surveyed and quoted separately or as a group. For tenanted homes in Lancashire, installation dates and access are agreed in writing before work starts. Landlords in Lancashire can arrange annual servicing around tenancy changes and inspection visits.
Who it suits
- Landlords in England and Wales replacing gas, oil or electric heating in let homes
- Portfolio landlords planning upgrades across several properties
- Landlords who want to remove gas appliances from a property
- Properties between tenancies, when access and disruption are easier to manage
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat pumps for landlords prices in Lancashire
Here are typical prices for landlords and let properties in Lancashire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in Lancashire
We cover 21 towns in Lancashire for landlords and let properties. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Preston | PR1 | Leyland | 7 h 25 min |
| Burnley | BB10 | Colne | 7 h 24 min |
| Blackburn | BB2 | Darwen | 7 h 25 min |
| Blackpool | FY1 | Poulton-le-Fylde | 7 h 24 min |
| Morecambe | LA4 | Lancaster | 7 h 21 min |
| Lancaster | LA1 | Morecambe | 7 h 22 min |
| Lytham St Annes | FY8 | Blackpool | 7 h 25 min |
| Skelmersdale | WN8 | Ormskirk | 7 h 27 min |
| Leyland | PR25 | Chorley | 7 h 26 min |
| Accrington | BB5 | Rawtenstall | 7 h 25 min |
| Chorley | PR6 | Leyland | 7 h 26 min |
| Darwen | BB3 | Blackburn | 7 h 26 min |
| Thornton-Cleveleys | FY5 | Poulton-le-Fylde | 7 h 24 min |
| Fleetwood | FY7 | Thornton-Cleveleys | 7 h 23 min |
| Ormskirk | L39 | Skelmersdale | 7 h 27 min |
| Rawtenstall | BB4 | Accrington | 7 h 26 min |
| Colne | BB8 | Burnley | 7 h 24 min |
| Poulton-le-Fylde | FY3 | Blackpool | 7 h 24 min |
| Carnforth | LA5 | Lancaster | 7 h 21 min |
| Clitheroe | BB7 | Accrington | 7 h 24 min |
| Garstang | PR3 | Poulton-le-Fylde | 7 h 23 min |
Landlords and let properties questions
Can I install a heat pump while tenants are living in the property?
Yes. Most installations typically take 2–4 days on site, with heating and hot water off for part of that time. We agree dates and access with you, provide written details to pass to tenants, and plan the changeover to keep downtime short. Preparing the outdoor unit and cylinder first shortens the period without heating.
Can a heat pump go on a block of flats or an HMO?
Often, yes, but it needs more planning. In flats, the outdoor unit position and pipe routes usually need freeholder or management company consent, and some positions need planning permission depending on the nation, which we check at survey. In HMOs, hot water demand is higher, so cylinder sizing is critical. Larger buildings may suit a commercial design instead.
Do tenants need training to use a heat pump?
Not training, but a clear explanation helps. Heat pumps are designed to run steadily, with radiators feeling warm rather than hot, so tenants used to boilers may be tempted to switch them off. We provide a handover sheet written for tenants covering the controls, hot water times, what to do if an error appears and why the unit should stay on.
Will a heat pump improve my property's EPC rating?
It can, but the effect varies. EPC ratings depend on insulation, glazing, the heating system and how the assessment is modelled, so a heat pump in a poorly insulated home may change the rating less than expected. Check the current letting standards for your nation, and ask an EPC assessor to model the change if the rating matters for your plans.