Most of the practical work is about people. Tenants need notice of the installation days, access to rooms where radiators change and a simple explanation of how to use the controls. We plan the installation in stages where possible, keep the time without heating and hot water as short as practical, and provide handover notes written for tenants.
Flats in Merseyside and across Merseyside need freeholder consent checked early, before the outdoor unit position is fixed. For tenanted homes in Merseyside, installation dates and access are agreed in writing before work starts. Landlords with let homes in Merseyside can have each property surveyed and quoted separately or as a group.
Who it suits
- Landlords who want to remove gas appliances from a property
- Properties between tenancies, when access and disruption are easier to manage
- Landlords in England and Wales replacing gas, oil or electric heating in let homes
- HMOs with high hot water demand that need careful cylinder sizing
Grants and rules for heat pumps in England
Homes in Merseyside can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat pumps for landlords prices in Merseyside
Here are typical prices for landlords and let properties in Merseyside, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £1,700–£4,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £2,700–£5,600 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £4,150–£7,550 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £6,100–£9,950 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £8,500–£14,350 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in Merseyside
We cover 14 towns in Merseyside for landlords and let properties. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Liverpool | L3 | Birkenhead | 7 h 29 min |
| Birkenhead | CH41 | Liverpool | 7 h 29 min |
| St Helens | WA10 | Prescot | 7 h 29 min |
| Southport | PR8 | Formby | 7 h 26 min |
| Wallasey | CH45 | Birkenhead | 7 h 29 min |
| Bootle | L21 | Wallasey | 7 h 28 min |
| Bebington | CH63 | Birkenhead | 7 h 30 min |
| Huyton | L36 | Prescot | 7 h 29 min |
| Kirkby | L32 | Maghull | 7 h 28 min |
| Prescot | L34 | Huyton | 7 h 29 min |
| Heswall | CH60 | Bebington | 7 h 30 min |
| Maghull | L31 | Kirkby | 7 h 28 min |
| Formby | L37 | Maghull | 7 h 27 min |
| Halewood | L26 | Huyton | 7 h 30 min |
Landlords and let properties questions
Do tenants need training to use a heat pump?
Not training, but a clear explanation helps. Heat pumps are designed to run steadily, with radiators feeling warm rather than hot, so tenants used to boilers may be tempted to switch them off. We provide a handover sheet written for tenants covering the controls, hot water times, what to do if an error appears and why the unit should stay on.
Can I install a heat pump while tenants are living in the property?
Yes. Most installations typically take 2–4 days on site, with heating and hot water off for part of that time. We agree dates and access with you, provide written details to pass to tenants, and plan the changeover to keep downtime short. Preparing the outdoor unit and cylinder first shortens the period without heating.
Can a heat pump go on a block of flats or an HMO?
Often, yes, but it needs more planning. In flats, the outdoor unit position and pipe routes usually need freeholder or management company consent, and some positions need planning permission depending on the nation, which we check at survey. In HMOs, hot water demand is higher, so cylinder sizing is critical. Larger buildings may suit a commercial design instead.
Will a heat pump improve my property's EPC rating?
It can, but the effect varies. EPC ratings depend on insulation, glazing, the heating system and how the assessment is modelled, so a heat pump in a poorly insulated home may change the rating less than expected. Check the current letting standards for your nation, and ask an EPC assessor to model the change if the rating matters for your plans.