Most of the practical work is about people. Tenants need notice of the installation days, access to rooms where radiators change and a simple explanation of how to use the controls. We plan the installation in stages where possible, keep the time without heating and hot water as short as practical, and provide handover notes written for tenants.
Landlords in Powys can arrange annual servicing around tenancy changes and inspection visits. For tenanted homes in Powys, installation dates and access are agreed in writing before work starts. Shared houses in Powys usually need larger hot water storage to cope with busy mornings.
Who it suits
- HMOs with high hot water demand that need careful cylinder sizing
- Portfolio landlords planning upgrades across several properties
- Properties between tenancies, when access and disruption are easier to manage
- Landlords who want to remove gas appliances from a property
Grants and rules for heat pumps in Wales
Homes in Powys can use the Boiler Upgrade Scheme, which applies in Wales as well as England: £7,500 towards an air source heat pump, or £9,000 when it replaces oil or LPG heating for installations from 21 July 2026 to 31 March 2027. The MCS-certified installer named in your quote applies and deducts the grant.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Wales has its own permitted development rules for air source heat pumps, so we check what applies to your property, including listed building and conservation-area constraints, at the survey.
Heat pumps for landlords prices in Powys
The ranges below are typical installed prices for homes in Powys, including VAT. A survey sets the exact figure, because two similar-looking houses in Powys can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in Powys
We cover 10 towns in Powys for landlords and let properties. Each links to local guide prices and the grant position for Wales.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Brecon | LD3 | Crickhowell | 7 h 45 min |
| Builth Wells | LD2 | Llandrindod Wells | 7 h 43 min |
| Crickhowell | NP8 | Abergavenny | 7 h 46 min |
| Hay-on-Wye | HR3 | Builth Wells | 7 h 44 min |
| Knighton | LD7 | Newtown | 7 h 41 min |
| Llandrindod Wells | LD1 | Builth Wells | 7 h 42 min |
| Machynlleth | SY20 | Dolgellau | 7 h 38 min |
| Newtown | SY16 | Welshpool | 7 h 39 min |
| Welshpool | SY21 | Newtown | 7 h 37 min |
| Ystradgynlais | SA9 | Pontardawe | 7 h 47 min |
Landlords and let properties questions
Will a heat pump improve my property's EPC rating?
It can, but the effect varies. EPC ratings depend on insulation, glazing, the heating system and how the assessment is modelled, so a heat pump in a poorly insulated home may change the rating less than expected. Check the current letting standards for your nation, and ask an EPC assessor to model the change if the rating matters for your plans.
Can I install a heat pump while tenants are living in the property?
Yes. Most installations typically take 2–4 days on site, with heating and hot water off for part of that time. We agree dates and access with you, provide written details to pass to tenants, and plan the changeover to keep downtime short. Preparing the outdoor unit and cylinder first shortens the period without heating.
How much does a heat pump cost for a rental property?
A full air-to-water system for a typical 3 bedroom home has an installed guide price of £12,000–£15,500, including VAT, or £4,500–£8,000 after the standard Boiler Upgrade Scheme grant in England and Wales. Flats and small terraces typically sit at £9,500–£12,500. Your written quote fixes the price after the survey.
Can a heat pump go on a block of flats or an HMO?
Often, yes, but it needs more planning. In flats, the outdoor unit position and pipe routes usually need freeholder or management company consent, and some positions need planning permission depending on the nation, which we check at survey. In HMOs, hot water demand is higher, so cylinder sizing is critical. Larger buildings may suit a commercial design instead.