- Area
- East Sussex
- Postcode district
- BN25
- Nation
- England
- Guide price
- From £9,800 inc VAT
- Survey
- Free for installation enquiries
Oil and LPG boiler replacement in Seaford: what to expect
A heat pump suits most Seaford homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
For homes outside Seaford reached by a long drive or narrow lane, delivery of the unit and cylinder is planned in advance. Owners across East Sussex can have oil tank removal arranged alongside a heat pump installation in Seaford.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Older oil boilers nearing the end of their life
- Eligible homes in England and Wales within the higher grant window
- Detached houses and bungalows with garden space for the unit
What's included
- Free survey with a detailed heat loss calculation for older construction
- Removal of the oil or LPG boiler and flue
- Help arranging LPG tank collection with your supplier
- Outdoor unit, heat pump cylinder, controls and radiator changes
- Network operator notification and electrical connection
Cottages and farmhouses in and around Seaford often have solid walls, so the survey looks closely at construction and draughts.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Seaford quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for replacing an oil or LPG boiler with a heat pump in Seaford
These are guide prices for East Sussex, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £800–£3,900 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £1,800–£4,900 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £3,350–£6,950 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £5,400–£9,550 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £8,000–£14,200 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
Winter daylight and heating in Seaford
On the shortest day Seaford gets about 7 hours 57 minutes of daylight, and the winter sun reaches only around 16° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
What happens after you enquire in Seaford?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Seaford home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing an oil or LPG boiler with a heat pump in Seaford: questions
What size heat pump does a Seaford home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Seaford home.
How long does installation take in Seaford?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Seaford home states the expected time.
Can you service a heat pump in Seaford that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Seaford, whoever fitted them. Tell us the make and model when you book.
Is a heat pump cheaper to run than oil?
It depends on oil prices, your home's insulation, the flow temperature and your electricity tariff, so there is no single answer. At the October to December 2026 price cap, a heat pump with a seasonal efficiency of 3.0 delivers heat for about 8.8p per kWh, and at 3.5 about 7.5p. Compare that with your oil cost per kWh of heat, allowing for your boiler's efficiency; the survey estimate gives a figure for your home.
Do I have to remove my oil tank?
Not always, but it should be emptied and made safe. A tank in good condition can be drained, cleaned and left in place, though most owners prefer to have it taken away to free up space. Old or damaged tanks are usually removed. Your quote says which option is included, and any remaining oil and sludge is disposed of properly.