- Area
- Greater Manchester
- Postcode district
- M34
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
Oil and LPG boiler replacement for Denton homes
Most homes can run on a heat pump if the system is designed properly, and Denton is no different. The key is matching the heat pump and radiators to the home's heat loss.
Owners across Greater Manchester can have oil tank removal arranged alongside a heat pump installation in Denton. Bungalows and detached houses near Denton running on LPG can move to a heat pump, with the tank collected by the supplier.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Detached houses and bungalows with garden space for the unit
- Owners tired of fuel deliveries and tank maintenance
- Older oil boilers nearing the end of their life
What's included
- Oil tank draining and removal or making safe, as set out in your quote
- Network operator notification and electrical connection
- Removal of the oil or LPG boiler and flue
- Help arranging LPG tank collection with your supplier
- MCS certificate and grant application in England and Wales where eligible
If your home near Denton is off the mains gas grid, a heat pump removes the need for oil or LPG deliveries.
Grants and rules for heat pumps in England
Homes in Denton can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for replacing an oil or LPG boiler with a heat pump in Denton
Here are typical prices for replacing an oil or LPG boiler with a heat pump in Greater Manchester, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £300–£3,250 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £1,300–£4,250 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £2,750–£6,200 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £4,700–£8,650 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £7,150–£13,050 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
Short winter days in Denton and what they mean
On the shortest day Denton gets only about 7 hours 28 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
What happens after you enquire in Denton?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Denton home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing an oil or LPG boiler with a heat pump in Denton: questions
Do I need new radiators for a heat pump in Denton?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Denton home gives a room-by-room list.
What size heat pump does a Denton home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Denton home.
How long does a heat pump survey take in Denton?
A home survey in Denton usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I have to remove my oil tank?
Not always, but it should be emptied and made safe. A tank in good condition can be drained, cleaned and left in place, though most owners prefer to have it taken away to free up space. Old or damaged tanks are usually removed. Your quote says which option is included, and any remaining oil and sludge is disposed of properly.
Is a heat pump cheaper to run than oil?
It depends on oil prices, your home's insulation, the flow temperature and your electricity tariff, so there is no single answer. At the October to December 2026 price cap, a heat pump with a seasonal efficiency of 3.0 delivers heat for about 8.8p per kWh, and at 3.5 about 7.5p. Compare that with your oil cost per kWh of heat, allowing for your boiler's efficiency; the survey estimate gives a figure for your home.