- Area
- Greater Manchester
- Postcode district
- SK14
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing an oil or LPG boiler with a heat pump in Hyde
The question for a Hyde home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
If your home near Hyde is off the mains gas grid, a heat pump removes the need for oil or LPG deliveries. Bungalows and detached houses near Hyde running on LPG can move to a heat pump, with the tank collected by the supplier.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Owners tired of fuel deliveries and tank maintenance
- Detached houses and bungalows with garden space for the unit
- Older oil boilers nearing the end of their life
What's included
- Oil tank draining and removal or making safe, as set out in your quote
- Help arranging LPG tank collection with your supplier
- Outdoor unit, heat pump cylinder, controls and radiator changes
- MCS certificate and grant application in England and Wales where eligible
- Network operator notification and electrical connection
Owners across Greater Manchester can have oil tank removal arranged alongside a heat pump installation in Hyde.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Hyde quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for replacing an oil or LPG boiler with a heat pump in Hyde
The ranges below are typical installed prices for homes in Greater Manchester, including VAT. A survey sets the exact figure, because two similar-looking houses in Hyde can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £300–£3,250 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £1,300–£4,250 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £2,750–£6,200 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £4,700–£8,650 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £7,150–£13,050 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
Short winter days in Hyde and what they mean
On the shortest day Hyde gets only about 7 hours 29 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
From survey to switch-on in Hyde
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Hyde; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing an oil or LPG boiler with a heat pump in Hyde: questions
Can you service a heat pump in Hyde that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Hyde, whoever fitted them. Tell us the make and model when you book.
How long does installation take in Hyde?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Hyde home states the expected time.
Where would the outdoor unit go on a Hyde house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Hyde home.
Do I have to remove my oil tank?
Not always, but it should be emptied and made safe. A tank in good condition can be drained, cleaned and left in place, though most owners prefer to have it taken away to free up space. Old or damaged tanks are usually removed. Your quote says which option is included, and any remaining oil and sludge is disposed of properly.
Is a heat pump cheaper to run than oil?
It depends on oil prices, your home's insulation, the flow temperature and your electricity tariff, so there is no single answer. At the October to December 2026 price cap, a heat pump with a seasonal efficiency of 3.0 delivers heat for about 8.8p per kWh, and at 3.5 about 7.5p. Compare that with your oil cost per kWh of heat, allowing for your boiler's efficiency; the survey estimate gives a figure for your home.