Air source heat pumps, surveyed, designed and installed· Free home survey for installation enquiries
0800 088 6341
Underfloor heating with heat pumps
England · 10 towns

Underfloor heating with heat pumps in Berkshire

Switching to a heat pump in Berkshire? Start with a guide price, then a surveyor measures your home and the written quote fixes the price.

Underfloor heating can cover one room, an extension or the whole ground floor, and it works alongside radiators upstairs. We design it from the same room-by-room heat loss figures as the rest of the system, set out pipe spacing and zones for each room, and confirm which floor finishes will let the heat through.

We coordinate with builders working in Berkshire so underfloor pipes are laid and tested before the screed goes down. Kitchen extensions in Berkshire are often the natural place to add underfloor heating when a heat pump goes in. Every underfloor design for Berkshire starts with the floor finish you plan to lay, from tiles to carpet.

Who it suits

  • Ground floors being dug out or relaid as part of wider building work
  • Self-builds and new floors where insulation and screed are going in anyway
  • Rooms where wall space for radiators is scarce
  • Homeowners who want even, gentle warmth with no radiators on show

Grants and rules for heat pumps in England

England

In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.

Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.

Underfloor heating with heat pumps prices in Berkshire

These are guide prices for Berkshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.

Underfloor heating with heat pumps prices in Berkshire
WorkGuide price
Wet underfloor heating, one room£1,600–£3,700
Wet underfloor heating, whole ground floor£5,300–£15,900

Installed, inc VAT. Floor finishes and screed drying time are confirmed at survey.

Towns we cover in Berkshire

We cover 10 towns in Berkshire for underfloor heating with a heat pump. Each links to local guide prices and the grant position for England.

TownPostcode districtNearest townMidwinter daylight
ReadingRG1Lower Earley7 h 50 min
SloughSL1Maidenhead7 h 49 min
BracknellRG12Crowthorne7 h 50 min
MaidenheadSL6Slough7 h 49 min
WokinghamRG40Crowthorne7 h 50 min
NewburyRG14Thatcham7 h 51 min
Lower EarleyRG6Reading7 h 50 min
CrowthorneRG45Sandhurst7 h 51 min
ThatchamRG19Newbury7 h 51 min
SandhurstGU47Crowthorne7 h 51 min

Underfloor heating with a heat pump questions

Can I heat just one room with underfloor heating?

Yes. A single room, such as a kitchen extension, can have its own underfloor zone connected to the heat pump alongside the radiators in the rest of the house. It needs its own thermostat and a manifold, which for one room can be compact. The design checks the room's heat loss so the floor can meet it at the system's flow temperature.

How much will an overlay system raise my floor?

A low-profile overlay system typically adds around 15–25 mm for the boards, plus the thickness of the new floor finish. That can be enough to need door trimming, threshold strips and adjustments where the floor meets kitchen units or stairs. We measure these details at the survey so the build-up is agreed before work starts.

How long does a screed floor take before I can use the heating?

Screed needs to dry before the heating is used at full temperature and before most floor finishes are laid. Drying time depends on the screed type, depth and conditions, from around a week for some liquid screeds to several weeks or more for traditional sand and cement. The heating is then brought up gradually over several days to avoid cracking.

Is underfloor heating better than radiators with a heat pump?

Underfloor heating usually allows a lower flow temperature than radiators, which helps a heat pump run efficiently. That does not make radiators a poor choice: correctly sized radiators also work well, and they are far less disruptive to fit in existing rooms. Many homes use underfloor heating in an extension or on the ground floor and radiators elsewhere.

Ready to price your heat pump?

Use the guide price tool, or book a free home survey and fixed written quote.

CallGet a quote