For installation enquiries the survey is free, and the results go straight into your written quote. If you want the calculation on its own, for example to plan building work or to compare quotes, a stand-alone heat loss survey and report has a guide price of £150–£400, including VAT.
Homeowners in Berkshire thinking about insulation work can use the survey to see how it would change their heat pump size. The survey in Berkshire includes a check of where the outdoor unit could sit and how its sound would reach neighbours. For Berkshire homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Who it suits
- Homes with an existing heat pump that seems undersized or expensive to run
- Self-builders and architects who need emitter and system sizes early
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Anyone getting a heat pump quote, as the first step
Grants and rules for heat pumps in England
Homes in Berkshire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat loss survey prices in Berkshire
These are guide prices for Berkshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £160–£420 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in Berkshire
We cover 10 towns in Berkshire for heat loss surveys. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Reading | RG1 | Lower Earley | 7 h 50 min |
| Slough | SL1 | Maidenhead | 7 h 49 min |
| Bracknell | RG12 | Crowthorne | 7 h 50 min |
| Maidenhead | SL6 | Slough | 7 h 49 min |
| Wokingham | RG40 | Crowthorne | 7 h 50 min |
| Newbury | RG14 | Thatcham | 7 h 51 min |
| Lower Earley | RG6 | Reading | 7 h 50 min |
| Crowthorne | RG45 | Sandhurst | 7 h 51 min |
| Thatcham | RG19 | Newbury | 7 h 51 min |
| Sandhurst | GU47 | Crowthorne | 7 h 51 min |
Heat loss surveys questions
Why can't you size the heat pump from my boiler?
Boilers are often much larger than a home's real heat loss, because they are sized for fast hot water and quick warm-ups. Matching a heat pump to the boiler's output usually means an oversized unit that costs more and switches on and off too often. A room-by-room calculation finds the actual heat demand, which is what the heat pump needs to meet.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.