Air source heat pumps, surveyed, designed and installed· Free home survey for installation enquiries
0800 088 6341
Underfloor heating with heat pumps
Northern Ireland · 3 towns

Underfloor heating with heat pumps in County Fermanagh

We arrange air source heat pumps for homes throughout County Fermanagh, from the first heat loss survey to commissioning and annual servicing.

Wet underfloor heating is a network of plastic pipes laid under the floor that carries warm water from the heat pump and turns the whole floor into a large, low-temperature radiator. Because the heating surface is so big, it can keep a room comfortable with water at around 35–40°C, which is the range where heat pumps typically work most efficiently.

Homeowners in County Fermanagh and across County Fermanagh can mix underfloor heating downstairs with radiators upstairs on one heat pump. Every underfloor design for County Fermanagh starts with the floor finish you plan to lay, from tiles to carpet. Kitchen extensions in County Fermanagh are often the natural place to add underfloor heating when a heat pump goes in.

Who it suits

  • Homeowners who want even, gentle warmth with no radiators on show
  • Rooms where wall space for radiators is scarce
  • Self-builds and new floors where insulation and screed are going in anyway
  • Ground floors being dug out or relaid as part of wider building work

Grants and rules for heat pumps in Northern Ireland

Northern Ireland

The Boiler Upgrade Scheme covers England and Wales only, and there is currently no dedicated heat pump grant for homeowners in Northern Ireland. Our quote for a home in County Fermanagh is therefore shown without a grant deduction; if support becomes available we will tell you how it applies.

Installing heat pumps has been zero-rated for VAT in Northern Ireland since 1 May 2023, in line with the rest of the UK, until 31 March 2027. Northern Ireland has its own permitted development rules and building regulations, and we confirm what applies to your property at survey.

Underfloor heating with heat pumps prices in County Fermanagh

Here are typical prices for underfloor heating with a heat pump in County Fermanagh, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.

Underfloor heating with heat pumps prices in County Fermanagh
WorkGuide price
Wet underfloor heating, one room£1,450–£3,450
Wet underfloor heating, whole ground floor£4,900–£14,700

Installed, inc VAT. Floor finishes and screed drying time are confirmed at survey.

Towns we cover in County Fermanagh

We cover 3 towns in County Fermanagh for underfloor heating with a heat pump. Each links to local guide prices and the grant position for Northern Ireland.

TownPostcode districtNearest townMidwinter daylight
EnniskillenBT74Irvinestown7 h 18 min
IrvinestownBT94Enniskillen7 h 16 min
LisnaskeaBT92Enniskillen7 h 19 min

Underfloor heating with a heat pump questions

How much will an overlay system raise my floor?

A low-profile overlay system typically adds around 15–25 mm for the boards, plus the thickness of the new floor finish. That can be enough to need door trimming, threshold strips and adjustments where the floor meets kitchen units or stairs. We measure these details at the survey so the build-up is agreed before work starts.

How much does underfloor heating cost with a heat pump?

Wet underfloor heating for a whole ground floor has a guide price of £5,000–£15,000, installed and including VAT, and a single room has a guide price of £1,500–£3,500. The spread reflects floor type, area, whether an overlay or screed system is used and how much floor preparation is needed. Your written quote fixes the price after the survey.

Can I put carpet over underfloor heating?

Yes, as long as the carpet and underlay together have a low tog rating, which measures how much they resist heat. For heat pump systems a combined figure of around 1.5 tog or less is a common target. Thick carpet on heavy underlay can cut output noticeably, so rooms with carpet may need closer pipe spacing.

How long does a screed floor take before I can use the heating?

Screed needs to dry before the heating is used at full temperature and before most floor finishes are laid. Drying time depends on the screed type, depth and conditions, from around a week for some liquid screeds to several weeks or more for traditional sand and cement. The heating is then brought up gradually over several days to avoid cracking.

Ready to price your heat pump?

Use the guide price tool, or book a free home survey and fixed written quote.

CallGet a quote