- Area
- Bedfordshire
- Postcode district
- SG19
- Nation
- England
- Guide price
- From £9,700 inc VAT
- Survey
- Free for installation enquiries
Before you book: air source heat pump installation in Sandy
A heat pump suits most Sandy homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Terraced streets in Sandy often mean a compact unit position at the rear, so siting and sound levels are checked carefully. In Sandy, cylinder space is planned with you, often in an airing cupboard, utility room or garage.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Homes replacing a gas, oil, LPG or electric heating system
- Owners who want one contract covering design, fitting and paperwork
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Boiler Upgrade Scheme application in England and Wales where eligible
- Commissioning, handover and a walk-through of the controls
- System design, unit sizing and a written quote
- Removal of the old boiler or heaters
- Free home survey and room-by-room heat loss calculation
Homeowners across Bedfordshire can arrange a survey in Sandy for a room-by-room design and a written quote before committing to anything.
Grants and rules for heat pumps in England
Homes in Sandy can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air source heat pump installation prices in Sandy
The ranges below are typical installed prices for homes in Bedfordshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Sandy can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,700–£12,750 | £2,200–£5,250 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,700–£13,750 | £3,200–£6,250 |
| 3 bedroom semi or small detached | 6–9 kW | £12,250–£15,800 | £4,750–£8,300 |
| 4 bedroom detached | 8–12 kW | £14,300–£18,350 | £6,800–£10,850 |
| 5+ bedroom or larger older house | 11–16 kW | £16,850–£22,950 | £9,350–£15,450 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Sandy's winters
On the shortest day Sandy gets about 7 hours 43 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
The steps for air source heat pump installation in Sandy
- Start online with a guide price or call us.
- A home survey in Sandy gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Sandy: questions
How long does a heat pump survey take in Sandy?
A home survey in Sandy usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How long does installation take in Sandy?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Sandy home states the expected time.
Do you cover Biggleswade as well as Sandy?
Yes. We arrange surveys and installation in Biggleswade, which is about 3 miles south of Sandy, and across Bedfordshire.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.