- Area
- Bedfordshire
- Postcode district
- SG19
- Nation
- England
- Nearby
- Biggleswade, Bedford, St Neots
We cover Sandy and nearby Biggleswade, Bedford and the rest of Bedfordshire. A heat pump is a whole-system change, so the survey looks at radiators, pipework, the hot water cylinder and the best spot for the outdoor unit.
Heat pump services in Sandy
All services in Sandy:
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Sandy quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pump guide prices in Sandy
Here are typical prices for an air source heat pump in Bedfordshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,700–£12,750 | £2,200–£5,250 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,700–£13,750 | £3,200–£6,250 |
| 3 bedroom semi or small detached | 6–9 kW | £12,250–£15,800 | £4,750–£8,300 |
| 4 bedroom detached | 8–12 kW | £14,300–£18,350 | £6,800–£10,850 |
| 5+ bedroom or larger older house | 11–16 kW | £16,850–£22,950 | £9,350–£15,450 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Sandy?
Sandy has about 7 hours 43 minutes of daylight at midwinter and 16 hours 45 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
Heat pumps in Sandy: questions
How soon can you survey a home in Sandy?
Survey dates depend on how busy installers are in Bedfordshire. We offer the next available dates when you enquire and confirm them in writing.
Do you cover Biggleswade as well as Sandy?
Yes. We arrange surveys and installation in Biggleswade, which is about 3 miles south of Sandy, and across Bedfordshire.
What size heat pump does a Sandy home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Sandy home.
Can you service a heat pump in Sandy that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Sandy, whoever fitted them. Tell us the make and model when you book.