- Area
- County Durham
- Postcode district
- DH8
- Nation
- England
- Guide price
- From £9,200 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation for Consett homes
Homes around Consett range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
For older properties in Consett, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized. Terraced streets in Consett often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Households with room for a hot water cylinder
What's included
- Commissioning, handover and a walk-through of the controls
- Outdoor unit, hot water cylinder and weather compensation controls
- Boiler Upgrade Scheme application in England and Wales where eligible
- Removal of the old boiler or heaters
- MCS registration and certificate, plus network operator notification
In Consett, cylinder space is planned with you, often in an airing cupboard, utility room or garage.
Grants and rules for heat pumps in England
Homes in Consett can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air source heat pump installation costs around Consett
The ranges below are typical installed prices for homes in County Durham, including VAT. A survey sets the exact figure, because two similar-looking houses in Consett can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £1,700–£4,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £2,700–£5,600 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £4,150–£7,550 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £6,100–£9,950 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £8,500–£14,350 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Consett?
On the shortest day Consett gets only about 7 hours 12 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
From survey to switch-on in Consett
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Consett home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Consett: questions
Do you cover Stanley as well as Consett?
Yes. We arrange surveys and installation in Stanley, which is about 5 miles east of Consett, and across County Durham.
How soon can you survey a home in Consett?
Survey dates depend on how busy installers are in County Durham. We offer the next available dates when you enquire and confirm them in writing.
What size heat pump does a Consett home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Consett home.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.