- Area
- Gloucestershire
- Postcode district
- BS37
- Nation
- England
- Guide price
- From £9,600 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation for Yate homes
Most homes can run on a heat pump if the system is designed properly, and Yate is no different. The key is matching the heat pump and radiators to the home's heat loss.
In Yate, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Installers working in Yate plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Houses with reasonable insulation, or a plan to improve it
- Owners who want one contract covering design, fitting and paperwork
What's included
- Boiler Upgrade Scheme application in England and Wales where eligible
- MCS registration and certificate, plus network operator notification
- Free home survey and room-by-room heat loss calculation
- Commissioning, handover and a walk-through of the controls
- Radiator and pipework changes where the design needs them
Many homes in Yate have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
Grants and rules for heat pumps in England
Homes in Yate can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for air source heat pump installation in Yate
These are guide prices for Gloucestershire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,600–£12,650 | £2,100–£5,150 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,600–£13,650 | £3,100–£6,150 |
| 3 bedroom semi or small detached | 6–9 kW | £12,100–£15,650 | £4,600–£8,150 |
| 4 bedroom detached | 8–12 kW | £14,150–£18,200 | £6,650–£10,700 |
| 5+ bedroom or larger older house | 11–16 kW | £16,650–£22,750 | £9,150–£15,250 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Yate's winters
On the shortest day Yate gets about 7 hours 49 minutes of daylight, and the winter sun reaches only around 15° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
From survey to switch-on in Yate
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Yate home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Yate: questions
How soon can you survey a home in Yate?
Survey dates depend on how busy installers are in Gloucestershire. We offer the next available dates when you enquire and confirm them in writing.
Do you cover Mangotsfield as well as Yate?
Yes. We arrange surveys and installation in Mangotsfield, which is about 5 miles south-west of Yate, and across Gloucestershire.
How long does a heat pump survey take in Yate?
A home survey in Yate usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.