Your contract is with S&K Property Investments and Improvement Ltd, part of the S&K Group, and the installation is carried out by installers we appoint and manage under that contract. Where you are eligible, the MCS-certified installer named in your quote applies for the Boiler Upgrade Scheme grant in England and Wales and deducts it from your price. In Scotland we work alongside your Home Energy Scotland application, and in Northern Ireland we explain what funding, if any, is currently available.
In Greater Manchester, cylinder space is planned with you, often in an airing cupboard, utility room or garage. For older properties in Greater Manchester, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized. Installers working in Greater Manchester plan the order of work so heating and hot water are off for as short a time as practical.
Who it suits
- Houses with reasonable insulation, or a plan to improve it
- Households with room for a hot water cylinder
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Owners who want one contract covering design, fitting and paperwork
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air source heat pump installation prices in Greater Manchester
Here are typical prices for air source heat pump installation in Greater Manchester, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in Greater Manchester
We cover 29 towns in Greater Manchester for air source heat pump installation. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Manchester | M2 | Stretford | 7 h 28 min |
| Oldham | OL1 | Middleton | 7 h 27 min |
| Wigan | WN1 | Golborne | 7 h 27 min |
| Bolton | BL1 | Radcliffe | 7 h 27 min |
| Stockport | SK1 | Denton | 7 h 29 min |
| Rochdale | OL16 | Heywood | 7 h 27 min |
| Sale | M33 | Stretford | 7 h 29 min |
| Bury | BL9 | Radcliffe | 7 h 27 min |
| Altrincham | WA14 | Sale | 7 h 29 min |
| Middleton | M24 | Heywood | 7 h 27 min |
| Ashton-under-Lyne | OL7 | Denton | 7 h 28 min |
| Leigh | WN7 | Atherton | 7 h 28 min |
| Stretford | M32 | Urmston | 7 h 29 min |
| Urmston | M41 | Stretford | 7 h 29 min |
| Eccles | M30 | Swinton | 7 h 28 min |
| Tyldesley | M29 | Atherton | 7 h 28 min |
| Hyde | SK14 | Denton | 7 h 29 min |
| Walkden | M28 | Swinton | 7 h 28 min |
| Prestwich | M25 | Whitefield | 7 h 28 min |
| Radcliffe | M26 | Whitefield | 7 h 27 min |
| Heywood | OL10 | Middleton | 7 h 27 min |
| Denton | M34 | Hyde | 7 h 28 min |
| Saddleworth | OL3 | Oldham | 7 h 27 min |
| Golborne | WA12 | Leigh | 7 h 28 min |
| Whitefield | M45 | Radcliffe | 7 h 27 min |
| Swinton | M27 | Eccles | 7 h 28 min |
| Atherton | M46 | Tyldesley | 7 h 28 min |
| Irlam | M44 | Urmston | 7 h 29 min |
| Horwich | BL6 | Bolton | 7 h 27 min |
Air source heat pump installation questions
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.