- Area
- Greater Manchester
- Postcode district
- OL7
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation for Ashton-under-Lyne homes
A heat pump suits most Ashton-under-Lyne homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Terraced streets in Ashton-under-Lyne often mean a compact unit position at the rear, so siting and sound levels are checked carefully. Installers working in Ashton-under-Lyne plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Households with room for a hot water cylinder
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Owners who want one contract covering design, fitting and paperwork
What's included
- Commissioning, handover and a walk-through of the controls
- System design, unit sizing and a written quote
- Free home survey and room-by-room heat loss calculation
- Boiler Upgrade Scheme application in England and Wales where eligible
- Removal of the old boiler or heaters
Many homes in Ashton-under-Lyne have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
Grants and rules for heat pumps in England
Homes in Ashton-under-Lyne can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for air source heat pump installation in Ashton-under-Lyne
Here are typical prices for air source heat pump installation in Greater Manchester, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Ashton-under-Lyne's winters
On the shortest day Ashton-under-Lyne gets only about 7 hours 28 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
The steps for air source heat pump installation in Ashton-under-Lyne
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Ashton-under-Lyne home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Ashton-under-Lyne: questions
What size heat pump does an Ashton-under-Lyne home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Ashton-under-Lyne home.
Where would the outdoor unit go on an Ashton-under-Lyne house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Ashton-under-Lyne home.
Can you service a heat pump in Ashton-under-Lyne that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Ashton-under-Lyne, whoever fitted them. Tell us the make and model when you book.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.