- Area
- Greater Manchester
- Postcode district
- BL1
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation in Bolton: what to expect
The question for a Bolton home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Installers working in Bolton plan the order of work so heating and hot water are off for as short a time as practical. Many homes in Bolton have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Homes replacing a gas, oil, LPG or electric heating system
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Houses with reasonable insulation, or a plan to improve it
What's included
- Outdoor unit, hot water cylinder and weather compensation controls
- Removal of the old boiler or heaters
- MCS registration and certificate, plus network operator notification
- Free home survey and room-by-room heat loss calculation
- System design, unit sizing and a written quote
Homeowners across Greater Manchester can arrange a survey in Bolton for a room-by-room design and a written quote before committing to anything.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Bolton quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air source heat pump installation in Bolton
The ranges below are typical installed prices for homes in Greater Manchester, including VAT. A survey sets the exact figure, because two similar-looking houses in Bolton can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Bolton?
Bolton sees roughly 7 hours 27 minutes of daylight in December and 17 hours 03 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
How installation works in Bolton
- Start online with a guide price or call us.
- A home survey in Bolton gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Bolton: questions
How long does installation take in Bolton?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Bolton home states the expected time.
Can you service a heat pump in Bolton that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Bolton, whoever fitted them. Tell us the make and model when you book.
What size heat pump does a Bolton home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Bolton home.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.