- Area
- Greater Manchester
- Postcode district
- OL7
- Nation
- England
- Nearby
- Denton, Hyde, Oldham
Homes in Ashton-under-Lyne and the wider OL7 district can book a free survey for installation enquiries. Nearby we also cover Denton (about 2 miles south) and Hyde.
Heat pump services in Ashton-under-Lyne
All services in Ashton-under-Lyne:
Grants and rules for heat pumps in England
Homes in Ashton-under-Lyne can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pump guide prices in Ashton-under-Lyne
The ranges below are typical installed prices for homes in Greater Manchester, including VAT. A survey sets the exact figure, because two similar-looking houses in Ashton-under-Lyne can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Ashton-under-Lyne and what they mean
Ashton-under-Lyne sees roughly 7 hours 28 minutes of daylight in December and 17 hours 02 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
Heat pumps in Ashton-under-Lyne: questions
How long does installation take in Ashton-under-Lyne?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for an Ashton-under-Lyne home states the expected time.
How long does a heat pump survey take in Ashton-under-Lyne?
A home survey in Ashton-under-Lyne usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does an Ashton-under-Lyne home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Ashton-under-Lyne home.
Do I need new radiators for a heat pump in Ashton-under-Lyne?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Ashton-under-Lyne home gives a room-by-room list.