- Area
- Greater London
- Postcode district
- IG1
- Nation
- England
- Guide price
- From £2,700 inc VAT
- Survey
- Free for installation enquiries
Before you book: air-to-air heat pumps in Ilford
In Ilford, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
A survey in Ilford covers indoor unit positions, pipe routes and hot water for homes across Greater London. Flats in Ilford on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Flats and apartments with storage or panel heaters
- Households that already have, or will add, a separate source of hot water
- Extensions, conservatories and garden rooms
What's included
- Electrical supply and controls set up for each room
- Outdoor unit and indoor units for each room
- Free survey covering rooms to heat, unit positions and hot water options
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Condensate drains and neat external pipe covers
Installers in Ilford plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Ilford quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for air-to-air heat pumps in Ilford
Guide prices for Ilford and the rest of Greater London are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,700–£5,600 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,500–£8,950 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Winter daylight and heating in Ilford
On the shortest day Ilford gets about 7 hours 49 minutes of daylight, and the winter sun reaches only around 15° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
How installation works in Ilford
- Start online with a guide price or call us.
- A home survey in Ilford gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Ilford: questions
What size heat pump does an Ilford home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Ilford home.
Do you cover Barking as well as Ilford?
Yes. We arrange surveys and installation in Barking, which is about 2 miles south of Ilford, and across Greater London.
Where would the outdoor unit go on an Ilford house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Ilford home.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.